1. Manuals
  2. Brands
  3. ClonerAlliance Manuals
  4. Video Gaming Accessories
  5. Flint D4
  6. User manual

ClonerAlliance Flint D4 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
ClonerAlliance Flint D4P User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Flint D4 and is the answer not in the manual?

Questions and answers

Related Manuals for ClonerAlliance Flint D4

Summary of Contents for ClonerAlliance Flint D4

  • Page 1 ClonerAlliance Flint D4P User Manual...
  • Page 2 ClonerAlliance Flint D4P User Manual This documentation describes how to use ClonerAlliance Flint D4P (Model: CA-1480FPP) device. Copyright Notice Copyright © ClonerAlliance Inc. All rights reserved. Documentation Version 1.0.0 No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without the prior written permission of ClonerAlliance Inc.
  • Page 3 Before using ClonerAlliance Flint D4P, please ensure that you read and under- stand the safety precautions below: 1. Do not attempt to open the case of ClonerAlliance Flint D4P or modify it in any way, as this will void the warranty.

  • Page 4: Table Of Contents

    CONTENTS Getting Started Box Contents ................1 Product Diagram.
  • Page 5 ..................68 Record/Capture with ClonerAlliance App .

  • Page 6: Getting Started

    GETTING STARTED 1.1 Box Contents • a. Remote Control • d. HDMI cable • b. ClonerAlliance Flint D4P • e. Male Type-C to male USB 3.0 cable • c. User Manual...

  • Page 7: Product Diagram

    ClonerAlliance Flint D4P User Manual 1.2 Product Diagram 1. LINE OUT: Insert the headphone plug into this jack to output the video sound. 2. MIC: Insert the microphone plug into this jack to input voice. 3. LINE IN: Stereo audio inputs.
  • Page 8 9. TO PC: Connect a Type-C to USB cable between PC and ClonerAlliance Flint D4P for capturing videos to PC. 10. |O|O|: Receive serial control signal from PC. The port is only for the debug mode of ClonerAlliance Flint D4P. It’s an optional port.
  • Page 9 ClonerAlliance Flint D4P User Manual Power on/Power off. Quick screen switching(HD1 and HD2). Select HD1 as the input signal. Select HD2 as the input signal. PIP mode. POP mode. PMP mode. Select HD1 audio for sound. Select HD2 audio for sound.

  • Page 10: Software Installation

    1. Install HDML-Cloner Pro Helper HDML-Cloner Pro Helper is a smart program to record video discs, game videos, homemade videos or anything from any video source under Windows OS working together with ClonerAlliance products. • Download HDML-Cloner Pro Helper software from https://static.cloner-alliance.com/download/hdml-cloner-pro.exe...
  • Page 11 ClonerAlliance Flint D4P User Manual Note: Prior to installing HDML-Cloner Pro Helper, please make sure you are using Windows 7 or later versions and your PC is equipped with USB 2.0 or 3.0 port. 2. Register HDML-Cloner Pro Helper Please register HDML-Cloner Pro Helper first before using, otherwise it can only be used for 7 days. Launch HDML-Cloner Pro Helper.
  • Page 12 ClonerAlliance Flint D4P User Manual real name and code. Then click ”OK” to finish the registration. • Obtain the registration code of HDML-Cloner Pro Helper. Scan the QR code below to get the code directly. Or visit https://www.cloner-alliance.com/register, fill in your product S/N.

  • Page 13: Install Obs Studio (Windows, Mac, And Linux Users)

    ClonerAlliance Flint D4P User Manual FHXXXXXXXX Click.Here For more details about registering HDML-Cloner Pro Helper, visit here to read step by step instructions. 2.2 Install OBS Studio (Windows, Mac, and Linux Users) Open Broadcaster Software is a Free and open source software for video recording and live streaming. Download and start streaming quickly and easily on Windows, Mac or Linux.
  • Page 14 ClonerAlliance Flint D4P User Manual 2.2. Install OBS Studio (Windows, Mac, and Linux Users)

  • Page 15: Osd Status Information

    OSD STATUS INFORMATION 3.1 Show up the OSD Please press button on remote to display OSD. Please observe the color of ”HD1/HD2”, if it shows grey and the message ”In case of Black Screen” at the bottom, please press and hold ”OK” button on remote for a while until Flint D4P reboot. Then confirm the color of ”HD1/HD2”...

  • Page 16: Osd Structure

    ClonerAlliance Flint D4P User Manual 3.2 OSD Structure 1. INPUT: Here shows the resolution of inputs which connected to D4P device 2. Overlay Position: It will show the overlay mode currently use 1. HD1 or HD2 as Display mode: 3.2. OSD Structure...
  • Page 17 ClonerAlliance Flint D4P User Manual 2. PIP as Display mode: 3.2. OSD Structure...
  • Page 18 ClonerAlliance Flint D4P User Manual 3. POP as Display mode: 3.2. OSD Structure...
  • Page 19 ClonerAlliance Flint D4P User Manual 4. PMP as Display mode: 3.2. OSD Structure...
  • Page 20 ClonerAlliance Flint D4P User Manual Output for The Display Mode: It shows which Audio and Video Source you’re choosing for displaying. It will update after you select Video and Audio channel on remote, please refresh the OSD menu by pressing button on remote.

  • Page 21: Switching Display Mode

    SWITCHING DISPLAY MODE ClonerAlliance Flint D4P device supports dual inputs, two signals can be displayed as picture in picture mode : HD1 Max: 4K@60hz Input, support 1080p@144Hz, 1080p@120Hz, 1080p@60hz etc. HD2 Max: 4K@30Hz Input, support 1080p@120Hz, 1080p@60hz etc. There are three different picture in picture modes for you to choose:...

  • Page 22: Pip Mode

    ClonerAlliance Flint D4P User Manual 4.1 PIP Mode Press to enter PIP mode Press to switch overlay position: 4.1. PIP Mode...
  • Page 23 ClonerAlliance Flint D4P User Manual You can choose output audio by selecting on remote. The small screen can be displayed at four corners of the big screen, you can press up/down/left/right arrows of to adjust the position: 4.1. PIP Mode...
  • Page 24 ClonerAlliance Flint D4P User Manual And the size of the small screen also can be adjusted by pressing on remote 4.1. PIP Mode...
  • Page 25 ClonerAlliance Flint D4P User Manual All the PIP information can be displayed on OSD menu: 4.1. PIP Mode...

  • Page 26: Pop Mode

    ClonerAlliance Flint D4P User Manual 4.2 POP Mode Press to enter POP mode You can swap up and down screens by pressing on remote, the two screens will change up side down: You can choose output audio by selecting on remote.
  • Page 27 ClonerAlliance Flint D4P User Manual All the POP information can be displayed on OSD menu: 4.2. POP Mode...

  • Page 28: Pmp Mode

    ClonerAlliance Flint D4P User Manual 4.3 PMP Mode Press to enter PMP mode You can swap left and right screens by pressing on remote, the two screens will exchange immediately: You can choose output audio by selecting on remote. 4.3. PMP Mode...
  • Page 29 ClonerAlliance Flint D4P User Manual All the PMP information can be displayed on OSD menu: 4.3. PMP Mode...

  • Page 30: Adjust And Mix Audio Channels

    ADJUST AND MIX AUDIO CHANNELS 1. LINE IN Line in socket is compatible with 3.5mm audio connector, such as audio mix device, mp3 players and cell phones. You can easily mix audio via “LINE IN”by using 3.5mm audio cable connected to audio devices. After connected audio device to “LINE IN”, it will directly mix audio to HDMI embedded audio.
  • Page 31 ClonerAlliance Flint D4P User Manual 2. MIC It is compatible with most 3.5mm audio standard MICs, you can mix your voice into source video.
  • Page 32 ClonerAlliance Flint D4P User Manual 3. LINE OUT LINE OUT socket is compatible with 3.5mm audio connector, you can connect speakers, headphones and sound bars.
  • Page 33 ClonerAlliance Flint D4P User Manual 4. EXT.AUDIO IN EXT.AUDIO IN is compatible with 3.5mm audio connector. It’s an optional port. You don’t have to use it. Please note that using the EXT.AUDIO IN will mute the audio of source HDMI embedded audio.
  • Page 34 ClonerAlliance Flint D4P User Manual And if you select ”EXT.” as Main Audio on remote, you can see the ”Audio Source” shows ”DVI” in OSD menu: Note: Using the EXT.AUDIO IN will mute HDMI embedded audio automatically, no matter it’s connected to audio source...

  • Page 35: Record/Capture Videos To Pc

    RECORD/CAPTURE VIDEOS TO PC. 6.1 Connect 1. Connect the source video player to the “HD1”or “HD2”port on ClonerAlliance Flint D4P via an HDMI cable. 2. ClonerAlliance Flint device supports 4K@60Hz/1080p@144Hz Input 4K@30Hz/1080p@120Hz at HD2 Input, the output will be 1080p@60fps automatically.
  • Page 36 ClonerAlliance Flint D4P User Manual • For Windows After all devices are connected properly, when you power on all devices, go to “Device manager”, it will show “CA Flint D4P VIDEO”under “Cameras”and “CA FLINT D4P AUDIO”under “Sound, video and game controllers”.
  • Page 37 ClonerAlliance Flint D4P User Manual • For Linux Connect ClonerAlliance Flint D4P to PC via USB Type-C cable, go to the “Sound/Input”, it will show as “CA FLINT USB Device”in the list. 6.1. Connect...
  • Page 38 ClonerAlliance Flint D4P User Manual • For Mac OS Connect ClonerAlliance Flint D4P to Mac, go to “System Preferences/Sound/Input”it shows “CA FLINT D4P Audio” 6.1. Connect...
  • Page 39 ClonerAlliance Flint D4P User Manual in the list. 6.1. Connect...

  • Page 40: Record/Capture For Windows Users

    ClonerAlliance Flint D4P User Manual 6.2 Record/Capture for Windows users Please download HDML-Cloner Pro Helper software and install it on your PC first. See details about Install and register HDML-Cloner Pro Helper (Windows Users) 1. After all devices are connected properly, insert the video disc into the drive of the video player and run HDML-Cloner Pro Helper.
  • Page 41 ClonerAlliance Flint D4P User Manual 2. Click to start recording. 6.2. Record/Capture for Windows users...
  • Page 42 ClonerAlliance Flint D4P User Manual 6.2. Record/Capture for Windows users...
  • Page 43 ClonerAlliance Flint D4P User Manual 3. Click to stop recording. Tip: During recording, you can also click to pause at any time. When you want to resume, please click to continue recording. sides, Click take screenshots, click capture animation. Software interfaces may vary depending on the version.
  • Page 44 ClonerAlliance Flint D4P User Manual 4. After recording, click to view the recorded video. Then you can click to play back the video directly. 6.2. Record/Capture for Windows users...
  • Page 45 ClonerAlliance Flint D4P User Manual HDML-Cloner Pro Helper also supports recording videos at the scheduled time. Click to enter the ”Setup” window. Then click the ”Schedule Recording” button. 6.2. Record/Capture for Windows users...
  • Page 46 ClonerAlliance Flint D4P User Manual Please enable schedule recording first, and set the Start time and duration for schedule recording. Then click “OK”. Then videos will be recorded automatically at the scheduled time. 6.2. Record/Capture for Windows users...

  • Page 47: Record/Capture For Mac Os Users

    ClonerAlliance Flint D4P User Manual 6.3 Record/Capture for Mac OS users 1. After all devices are connected properly, insert the video disc into the drive of the video player and launch Quick Time Player. 2. Please confirm the setting of Camera/Microphone/Quality as below.

  • Page 48: Record/Capture For Linux Users

    ClonerAlliance Flint D4P User Manual 3. You can capture your game now. 6.4 Record/Capture for Linux users 1. After all devices are connected properly, insert the video disc into the drive of the video player and launch OBS Studio software.
  • Page 49 ClonerAlliance Flint D4P User Manual 2. In source column, click “+”to add video capture device: 6.4. Record/Capture for Linux users...
  • Page 50 ClonerAlliance Flint D4P User Manual 3. It’s recommended that to use 60pfs frame rate while game recording/streaming, please set up as following: 6.4. Record/Capture for Linux users...
  • Page 51 ClonerAlliance Flint D4P User Manual 4. In source column, click “+”to add audio capture device: 6.4. Record/Capture for Linux users...
  • Page 52 ClonerAlliance Flint D4P User Manual 5. If you need to monitor the audio during preview/recording, please also modify the settings in advanced audio properties: 6.4. Record/Capture for Linux users...
  • Page 53 ClonerAlliance Flint D4P User Manual 6. Now you can start recording and streaming. 6.4. Record/Capture for Linux users...
  • Page 54 ClonerAlliance Flint D4P User Manual 6.4. Record/Capture for Linux users...

  • Page 55: Record/Capture Game Console With Pc

    RECORD/CAPTURE GAME CONSOLE WITH PC. 7.1 Connect 1. Connect the game console to the “HD1”or “HD2”port on ClonerAlliance Flint D4P via an HDMI cable. 2. ClonerAlliance Flint device supports 4K@60Hz/1080p@144Hz Input 4K@30Hz/1080p@120Hz at HD2 Input, the output will be 1080p@60fps automatically.
  • Page 56 ClonerAlliance Flint D4P User Manual • For Windows After all devices are connected properly, when you power on all devices, go to “Device manager”, it will show “CA Flint D4P VIDEO”under “Cameras”and “CA FLINT D4P AUDIO”under “Sound, video and game controllers”.
  • Page 57 ClonerAlliance Flint D4P User Manual • For Linux Connect ClonerAlliance Flint D4P to PC via USB Type-C cable, go to the “Sound/Input”, it will show it as “CA FLINT USB Device”in the list. 7.1. Connect...
  • Page 58 ClonerAlliance Flint D4P User Manual • For Mac OS Connect ClonerAlliance Flint D4P to Mac, go to“System Preferences/Sound/Input”it also shows“CA FLINT D4P Audio 7.1. Connect...
  • Page 59 ClonerAlliance Flint D4P User Manual Device”among the list. 7.1. Connect...

  • Page 60: Record/Capture Game Console Videos To Pc

    ClonerAlliance Flint D4P User Manual 7.2 Record/capture game console videos to PC You can see details about record/capture game console videos at Record/capture videos to PC. 7.2. Record/capture game console videos to PC...

  • Page 61: Play Game Console On Pc Without Tv

    PLAY GAME CONSOLE ON PC WITHOUT TV With ClonerAlliance Flint D4P, you can use your PC’s screen to play game console. No TV required. 8.1 Connect...

  • Page 62: Play Game Console For Windows Users

    ClonerAlliance customers get the best gaming experience in HDML-Cloner Pro Helper, our developers add a new viewing mode as ” Playing game mode” . Under the ” Playing game mode” , our software sets the“FPS” of ClonerAlliance Flint D4P to the highest and selects the fastest “Picture Render Engine”automatically. Do you want to experience it now? Let’s get started.
  • Page 63 ClonerAlliance Flint D4P User Manual Please connect game console to the HDMI port of ClonerAlliance Flint D4P with HDMI cable then power up the game console. Step 4: Launch HDML-Cloner Pro Helper software, it will recognize ClonerAlliance Flint D4P device automatically and show the game console’s screen after connected.
  • Page 64 ClonerAlliance Flint D4P User Manual For the best gaming experience, it is recommended to click to switch the viewing mode as ”Playing game mode”. In this mode, it will present ultra high flow and ultra low latency. Note: • ClonerAlliance...

  • Page 65: Play Game Console For Mac Os Users

    ClonerAlliance Flint D4P User Manual 4K@30Hz/1080p@120Hz at HD2 Input, the output will be 1080p@60fps automatically. 8.3 Play game console for Mac OS users 1. After all devices are connected properly, insert the video disc into the drive of the video player and launch Quick Time Player.

  • Page 66: Play Game Console For Linux

    ClonerAlliance Flint D4P User Manual 3. You can capture your game now. 8.4 Play game console for Linux users 1. After all devices are connected properly, insert the video disc into the drive of the video player and launch OBS Studio software.
  • Page 67 ClonerAlliance Flint D4P User Manual 2. In source column, click “+”to add video capture device: 8.4. Play game console for Linux users...
  • Page 68 ClonerAlliance Flint D4P User Manual 3. It’s recommended that to use 60pfs frame rate while game recording/streaming, please set up as following: 8.4. Play game console for Linux users...
  • Page 69 ClonerAlliance Flint D4P User Manual 4. In source column, click “+”to add audio capture device: 8.4. Play game console for Linux users...
  • Page 70 ClonerAlliance Flint D4P User Manual 5. If you need to monitor the audio during preview/recording, please also modify the settings in advanced audio properties: 8.4. Play game console for Linux users...
  • Page 71 ClonerAlliance Flint D4P User Manual 6. Now you can start recording and streaming. 8.4. Play game console for Linux users...
  • Page 72 ClonerAlliance Flint D4P User Manual 8.4. Play game console for Linux users...

  • Page 73: Record/Capture Videos To Mobile

    1. Connect the game console to the “HD1”or “HD2”port on ClonerAlliance Flint D4P via an HDMI cable. 2. ClonerAlliance Flint device supports 4K@60Hz/1080p@144Hz Input 4K@30Hz/1080p@120Hz at HD2 Input, the output will be 1080p@60fps automatically. 3. Connect ClonerAlliance Flint D4P to Android phone with the USB2.0(female) to USB Micro-B OTG cable or USB type-A to type-C connector.
  • Page 74 ClonerAlliance Flint D4P User Manual • For USB Type-C socket phone. Please use USB(female) to Type-C(male) connector to connect to your Android phone. • For USB Micro-B socket phone. Please use USB Type-C (male) to USB (male) cable and Micro-B OTG cable to connect your Android phone.

  • Page 75: Record/Capture With Cloneralliance App

    ClonerAlliance Flint D4P User Manual 9.2 Record/Capture with ClonerAlliance App Step 1: Please connect source device properly. Step 2: Please install Cloner Alliance APP on your phone and launch it after finishing installation. It will display source video on your phone.
  • Page 76 ClonerAlliance Flint D4P User Manual Step 3: Set up resolution, bitrate and duration (short video capture) by tapping Settings and go in Video capture menu as fol- 9.2. Record/Capture with ClonerAlliance App...
  • Page 77 ClonerAlliance Flint D4P User Manual lowing picture shows: Video Capture • Resolution: 1920*1080; 1280*720; 720*480 • Bitrate: 100KBps-10000KBps • Duration: 3min to infinity 9.2. Record/Capture with ClonerAlliance App...
  • Page 78 ClonerAlliance Flint D4P User Manual Step 4: then to record video as configured in ”Preview and recorder” and tap to stop recording (short video will stop automatically as duration configured). Step 5: to check all files have been saved. 9.2. Record/Capture with ClonerAlliance App...

  • Page 79: Preview Videos For Live Streaming

    PREVIEW VIDEOS FOR LIVE STREAMING. You can use ClonerAlliance Flint D4P in OBS Studio to preview/record/livestream videos, which is a popular open source software for video recording and live streaming. 10.1 Connect...

  • Page 80: Install Software

    HD2 of ClonerAlliance Flint D4P is in working mode, blinking Blue/Green indicates that there is no signal connected to HD1/HD2 input. 10.2 Install software If you want to use OBS to preview/record/livestream videos via ClonerAlliance Flint D4P, you need to install both HDML- Cloner Pro Helper and OBS Studio first. See details about...

  • Page 81: Setting For Preview Video

    ClonerAlliance Flint D4P User Manual 10.3 Setting for preview video Step 1: Launch OBS Studio software on PC, Click “+”icon under “Sources”window, and select “Video Capture Device”: 10.3. Setting for preview video...
  • Page 82 ClonerAlliance Flint D4P User Manual Step 2: Select “CA FLINT D4P VIDEO”in the drop box next to “Device”: 10.3. Setting for preview video...
  • Page 83 ClonerAlliance Flint D4P User Manual Set Audio Output Mode, please select “Output desktop audio (DirectSound), Audio Device to “CA FLINT D4P AUDIO” 10.3. Setting for preview video...
  • Page 84 ClonerAlliance Flint D4P User Manual Step 3: Please make sure the “Sample rate”in “Audio”settings is set to “48KHz”. 10.3. Setting for preview video...
  • Page 85 ClonerAlliance Flint D4P User Manual Step 4: Then you can start recording or streaming video: 10.3. Setting for preview video...

  • Page 86: Frequently Asked Questions

    What can I do when it shows “Black screen”? 1. Since ClonerAlliance Flint D4P device supports dual inputs, please make sure the signal you choose to display is corresponding to the signal you are connecting to. You can switch “Display mode”easily on remote.
  • Page 87 ClonerAlliance Flint D4P User Manual 2. If you have checked above,it still displays black screen, don’t worry, it can be solved easily by following operation. Please press button on remote to display OSD. Please observe the color of ”HD1/HD2”, if it shows grey, please press and hold ”OK”...
  • Page 88 Can I use multiple ClonerAlliance Flint D4P devices on one PC at the same time? Sure, both bundled software HDML-Cloner Pro Helper and OBS studio can support multiple ClonerAlliance Flint D4P devices working on one PC at the same time, you just need to add and select devices individually as following:...
  • Page 89 ClonerAlliance Flint D4P User Manual You can easily distinguish each device through video preview window.
  • Page 90 ClonerAlliance Flint D4P User Manual And you can select an audio device for each video capture device based on the insertion order. Does ClonerAlliance Flint D4P Need Extra Power Supply?
  • Page 91 Can I Watch The Videos On My TV When I Use ClonerAlliance Flint D4P To Record The Videos? Yes. ClonerAlliance Flint D4P can pass-through HDMI video signal out to TV while recording video. You can enjoy watching video without interruption.
  • Page 92 ClonerAlliance Flint D4P User Manual At Set Audio Output Mode, please select “Output desktop audio (DirectSound), Audio Device to “Microphone(CA Flint D4P Audio )”, then click “OK”: How to deal with PC doesn’t recognize ClonerAlliance Flint D4P device?
  • Page 93 ClonerAlliance Flint D4P User Manual Please change another USB port and re-plug in, it’ll help. Why are audio and video out of sync when I use OBS studio with ClonerAlliance Flint D4P? Please set up as following and it will perform normally.
  • Page 94 ClonerAlliance Flint D4P User Manual If your video and audio are still not synchronized, please adjust video delay value in “Source-filter-Video delay(Async)” around 470ms according to your circumstance.
  • Page 95 ClonerAlliance Flint D4P User Manual...
  • Page 96 ClonerAlliance Flint D4P User Manual...
  • Page 97 ClonerAlliance Flint D4P User Manual...

  • Page 98: Product Specifications

    PRODUCT SPECIFICATIONS HD1 Max: 4K60hz. Support: 4K60hz, 1080p144hz, 1080p120hz, Input 1080p60hz etc. HD2 Max: 4K30hz. Support: 4k30hz, 1080p120hz, 1080p60 etc. Output Up to 60 fps @ 1920x1080 Recording Up to 60 fps @ 1920x1080 Output for- MJPEG,YUY2 Video stan- NTSC, PAL dard (input) Input signal HDMI, Line in, Mic, EXT.Audio...

  • Page 99: After Sales Warranty

    AFTER SALES WARRANTY ClonerAlliance Inc. provides 60-Day No Hassle Return(No Additional Fee) and 2-Year Replacement Warranty Service for all hardware. Please rest assured to use ClonerAl- liance products.

  • Page 100: Contact Us

    CONTACT US If you encounter any problem when using our products, please contact us by support@cloner-alliance.com or call 1-844-9-CLONER (toll free) and we will serve you with utmost satisfaction. We’ll offer a satisfying discount on batch purchase and affiliate program. If you are interested, please contact us by market@cloner-alliance.com.

  • Page 101: Disclaimer

    DISCLAIMER HDMI is a registered trademark of HDMI Licensing, LLC. USB is a registered trade- mark of USB Implementers Forum. HDMI and USB are registered trademarks of their respective companies. ClonerAlliance Inc. is not affiliated with those companies.
  • Page 102 Toll free: 1-844-9-CLONER Support Email: support@cloner-alliance.com Market Email: market@cloner-alliance.com www.cloner-alliance.com Copyright ClonerAlliance Inc. All rights reserved.

This manual is also suitable for:

Ca-1480fpp

Table of Contents