Safety Instructions; Areas Of Responsibility; Permitted Use; Limits Of Use - Makita SKR200 Manual

Safety Instructions

The person responsible for the instrument
must ensure that all users understand
these directions and adhere to them.

Areas of responsibility

Responsibilities of the manufacturer
of the original equipment:
Makita Corporation Anjo,
Aichi 446-8502 Japan
Internet: www.makita.com
The company above is responsible for
supplying the product, including the User
Manual in a completely safe condition.
The company above is not responsible for
third party accessories.
Responsibilities of the person in
charge of the instrument:
• To understand the safety instructions on
the product and the instructions in the
User Manual.
• To be familiar with local safety
regulations relating to accident
prevention.
• Always prevent access to the product by
unauthorised personnel.

Permitted use

• The instrument casts a horizontal laser
plane for the purposes of alignment.
• The unit can be set up on it's own base
plate, wallmount or on a tripod.
• The laser beam can be detected by
means of a laser detector.
• This product is intended for indoor use
and applications.

Limits of use

Refer to section "Technical data".
The device is designed for use in
areas permanently habitable by
humans. Do not use the product in
explosion hazardous areas or in
aggressive environments.
Makita SKR200

Prohibited use

• Using the product without instruction
• Use outside of the intended limits.
• Disabling safety systems.
• Removal of hazard notices.
• Opening the product using tools, for
example screwdriver, unless this is
specifically permitted for certain
functions.
• Modification or conversion of the
product.
• Use after misappropriation.
• Use of products with obviously
recognizable damages or defects.
• Use with accessories from other
manufacturers without express
approval.
• Inadequate safeguards at the work site,
for example when using on or near
roads.
• Deliberate dazzling of third parties.
• Controlling of machines, moving objects
or similar monitoring application without
additional control and safety
installations.
EN
19