Set-Up Of The Special Needs Module For Ip Door Intercoms - Telecom Behnke 20-3117 Manual

Special needs Manual
GB GB
Description of connections

4.3. Set-up of the special needs module for IP door intercoms

The special needs module can be used in
conjunction with Behnke IP door intercoms with
software version BT4 Build 81 or later.
To activate the pictograms of the special needs
module, navigate in tab "Start" to "Single
set-up" in the web frontend and choose option
"Set default settings" under the "accessibility"
category (cf. figure 3). At the same time, voice
messages are played as soon as a pictogram is
chosen. See the SIP basic electronics manual to
learn how to retrieve the web frontend of the SIP
intercom.
Activation of the pictograms and voice messages
52 www.behnke-online.com