Table of Contents
Advertisement
Emergency transport
You can move the snow thrower by pushing or pulling it without
engine power.
Place the snow thrower on the level ground after transportation and
use a new cotter pin when replacing the wheel pin.
1. Remove the cotter pins from the rear right and left wheels.
2. Remove the wheel pins from the rear right and left wheels.
3. The track rotates freely, allowing the operator to move the snow
thrower without engine power.
• Before removing the wheel pins, make sure to stop the rotating parts,
stop the engine and remove the engine switch key.
• Do not remove the wheel pins on the slope. The snow thrower may
move unintentionally, causing injury.
120
WHEEL PIN
COTTER PIN
Advertisement
Table of Contents
