Subscribe to Our Youtube Channel
Related Manuals for TROLL nursery LILLY
Summary of Contents for TROLL nursery LILLY
- Page 1 LILLY COT with drop-side IMPORTANT RETAIN FOR FUTURE REFERENCE READ CAREFULLY The illustrations in these instructions are to be used as a guide only Conforms to standart EN 716-1:2008 Made in Latvia...
- Page 2 INSTRUCTIONS FOR THE SAFE USE INSTRUCTIONS FOR THE SAFE USE Your child’s safety is your resposibility. Remove all parts from packaging and check against the parts list. Do not discard any packaging until you are sure you have all parts and the pack of fittings. You will find it easier to assemble the cot if a second adult is available to help you.
- Page 3 PARTS LIST PARTS LIST FITTINGS LIST FITTINGS LIST...
- Page 4 ASSEMBLING x 4 screws to attach fixed side. Do not tighten. Overhang should be inside cot. WARNING! The t of the mattress surface must not be higher than this mark! Insert the x 2 cross dowels and wooden dowels into the stabilizing bar. Then insert the Allen-headed bolts through the wholes in the short ends.
- Page 5 Adjust the wheel runners so that the gap between the dropside and the cot end is less than 3 mm. For installation of drop side insert the crib drop side runner into the headboard groove on one headboard end. Move the second headboard slightly and insert the drop side runner into the headboard groove.
Need help?
Do you have a question about the LILLY and is the answer not in the manual?
Questions and answers