Sunrise Medical Jay J2 User Instruction Manual & Warranty page 7

Xtreme Cushion accessory parts
Each Xtreme includes two lateral thigh supports. The supports are located
in pockets sewn inside the bottom panel of the cover. When positioned
under the front of the foam base, the supports enhance the top surface
contour of the cushion providing lateral thigh support without compromising
softness.This increases the contact with the legs to help control abduction
(separation of legs).
If you do not want to use the lateral thigh supports, unzip the cover and
remove the base and fluid pad, then remove the lateral thigh supports from
their pockets inside the cover. Re-insert the base and fluid pad into the cover
and zip the cover closed.
Optional solid seat
An optional half solid seat is available from Sunrise specifically for the Xtreme.
The solid seat fits under the seat well portion of the base only.The solid seat
can help enhance the stability of the cushion, if necessary, without compro-
mising softness under the legs. It is ordered as a modified solid seat, contact
an authorized supplier to order.
Lateral thigh support
pocket inside cover
Reassembling the Xtreme Cushion after cleaning
Follow cleaning and maintenance instructions as described in
"Easy maintenance and cleaning" then reassemble as follows.
Insert the foam base into the moisture resistance inner cover. Ensure that the
zipper is at the rear of the foam base (the part number tag should be to the
rear of the foam base) where the seat well is located, and the Velcro
top in the seat well. Attach the fluid pad to the inner cover at the seat well
matching all six Velcro
insert the left and right lateral thigh supports into their respective pockets
(if you are using them).Turn the cover to the outside again and insert the
foam base with the fluid pad attached into the outer cover.The lateral thigh
supports should be under the front of the cushion and the fluid pad should
be at the rear of the cushion where the cover zips.The Xtreme components
are labeled with front and rear to help match components for easy assembly.
strip locations.Turn the outer cover inside out and
®
7
Cover
Lateral thigh support
® is on
XT2105 Rev. J