Sunrise Medical Jay J2 User Instruction Manual & Warranty page 2

INSTRUCTIONS FOR JAY J2
AND XTREME CUSHIONS
Caution
Installing a cushion on a wheelchair may affect the center of gravity of the
wheelchair and may cause the wheelchair to tip backwards, potentially resulting
in injury. Always assess for the potential need for anti-tippers or amputee axle
adapter brackets to be added to the wheelchair to help increase stability.
All Jay fluid cushions are designed to help reduce the incidence of pressure
sores. However, no cushion can completely eliminate sitting pressure or prevent
pressure sores. Jay fluid cushions are not a substitute for good skin care
including; proper diet, cleanliness, and regular pressure reliefs.
In addition, prior to prolonged sitting, any cushion should be tried for a few
hours at a time while a clinician inspects your skin to ensure that red pressure
spots are not developing.You should regularly check for skin redness.The clinical
indicator for tissue breakdown is skin redness. If your skin develops redness,
discontinue the use of the cushion immediately and see your doctor or therapist.
Do not leave the cushion outside overnight at temperatures below 40° F (5° C).
Allow the cushion to warm to room temperature before using. Sitting on
extremely cold or hot surfaces can cause skin damage.
Avoid sharp objects or exposure to excessive heat or open flame.
Fitting a pressure distributing cushion
Select a cushion to match your hip width when in the seated position.The
cushion length should extend to within 1" - 2" (2.5cm - 5cm) from the back of
the knees. Place the cushion to the back of the wheelchair with the material
identification tags and fluid pad(s) toward the rear.When fit correctly, your hips
should be to the back of the chair.Your ischials (seat bones) should be centered
on the Jay Flow™ Fluid pad(s) in the seat well of the cushion. Proper footrest
adjustment may enhance sitting comfort and help lower peak sitting pressures.
Adjust the footrests so your legs rest firmly but comfortably on the cushion.
Note: Do not use the wheelchair's seat width as a guide in determining the
appropriate cushion width Improper cushion fit may be detrimental to the
performance of a pressure distributing cushion and its support of the body.
Avoid using the cushion on overly stretched seat upholstery. Stretched upholstery
does not provide adequate support for the cushion and improper positioning
may result. Replace stretched upholstery or purchase the Jay Adjustable Solid
Seat or the Jay Solid Seat insert that is appropriate for the cushion.
Avoid using overly stretched back rest upholstery. Stretched back upholstery
does not provide adequate support for the body and improper positioning
may result. Replace stretched back rest upholstery or purchase a back support
product from Sunrise that is appropriate for you. Contact a authorized supplier
for a free demonstration of these products.
XT2105 Rev. J
2