SEW-Eurodrive MOVIFIT MC Manual
  1. Manuals
  2. Brands
  3. SEW-Eurodrive Manuals
  4. Safety Equipment
  5. MOVIFIT MC
  6. Manual
SEW-Eurodrive MOVIFIT MC Manual

SEW-Eurodrive MOVIFIT MC Manual

Functional safety
Hide thumbs Also See for MOVIFIT MC:
Table of Contents

Advertisement

Quick Links

Download this manual
Drive Technology \ Drive Automation \ System Integration \ Services
Manual
®
MOVIFIT
MC/FC
Functional Safety
Edition 07/2011
19300417 / EN

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MOVIFIT MC and is the answer not in the manual?

Questions and answers

Related Manuals for SEW-Eurodrive MOVIFIT MC

Summary of Contents for SEW-Eurodrive MOVIFIT MC

  • Page 1 Drive Technology \ Drive Automation \ System Integration \ Services Manual ® MOVIFIT MC/FC Functional Safety Edition 07/2011 19300417 / EN...
  • Page 2 SEW-EURODRIVE—Driving the world...

  • Page 3: Table Of Contents

    Contents Contents General Information .................... 4 Structure of the safety notes ............... 4 Right to claim under warranty ..............4 Exclusion of liability..................5 Other applicable documentation ..............5 Safety Concept ....................6 ® MOVIFIT MC safety concept..............6 ® Safety concept for MOVIFIT FC frequency inverters ........

  • Page 4: General Information

    General Information Structure of the safety notes General Information Structure of the safety notes 1.1.1 Meaning of the signal words The following table shows the grading and meaning of the signal words for safety notes, notes on potential risks of damage to property, and other notes. Signal word Meaning Consequences if disregarded...

  • Page 5: Exclusion Of Liability

    MOVIMOT drives and to achieve the specified prod- uct characteristics and performance requirements. SEW-EURODRIVE assumes no lia- bility for injury to persons or damage to equipment or property resulting from non-obser- vance of these operating instructions. In such cases, any liability for defects is excluded.

  • Page 6: Safety Concept

    Safety Concept ® MOVIFIT MC safety concept Safety Concept ® MOVIFIT MC safety concept 2.1.1 Functional description ® The MC version of MOVIFIT acts as a power distributor and communication interface ® for controlling up to three MOVIMOT drives. It features the option of enabling connec- tion of an external emergency stop relay (or a higher-level safety control system).
  • Page 7 Safety Concept ® MOVIFIT MC safety concept ® 2.1.2 MOVIFIT MC block circuit diagram ® The block circuit diagram below shows the MOVIFIT MC safety concept. Field A-Box E-Box Safety relay short- +24V_MM +24V_P (external) approved for circuit EN 954-1 cat. 3 or protect.

  • Page 8: Safety Concept For Movifit ® Fc Frequency Inverters

    Safety Concept ® Safety concept for MOVIFIT FC frequency inverters ® Safety concept for MOVIFIT FC frequency inverters 2.2.1 Functional description ® The FC version of MOVIFIT acts as a power distributor and communication interface with an integrated frequency inverter with a range of 0.37 to 4 kW (0.50 to 5 hp). It is distinguished by the option of enabling connection of an external emergency stop relay (or a higher-level safety control system).
  • Page 9 Safety Concept ® Safety concept for MOVIFIT FC frequency inverters ® 2.2.2 MOVIFIT FC block circuit diagram Field A-Box E-Box Control Power section electronics Safety relay (external) approved 24V_P for EN 954-1 cat. 3 Safety pr EN ISO 13849-1 0V24_P PL "d"...

  • Page 10: Safety Concept For Profisafe Option S11

    Safety Concept Safety concept for PROFIsafe Option S11 Safety concept for PROFIsafe Option S11 • PROFIsafe option S11 is an integrated safety-oriented electronics component with failsafe inputs and outputs (F-DI, F-DO). The safety concept of this component is based on a safe status for all safety-oriented process variables. For PROFIsafe Op- tion S11 this value is "0", for all inputs F-DI and outputs F-DO.

  • Page 11: Safety Functions

    Safety Concept Safety functions Safety functions The following drive-related safety functions can be used: • STO (safe torque off according to IEC 61800-5-2) through disconnection of the STO input. If the STO function is activated, the frequency inverter no longer supplies power to the motor for generating torque.
  • Page 12 Safety Concept Safety functions • SS1(c) (Safe Stop 1, function variant c according to IEC 61800-5-2) through suitable external controller (e.g. safety relay with delayed switch-off). The following sequence is mandatory: – Decelerate the drive using an appropriate brake ramp specified via setpoints. –...

  • Page 13: Safety Conditions

    Safety Conditions Notes on stop categories Safety Conditions ® The following conditions are mandatory for installation and operation of MOVIFIT safety-oriented applications according to the safety categories mentioned above. The conditions are divided into the following sections: • Approved devices •...

  • Page 14: Approved Devices

    • Certification is only valid as of status 11 of the wiring board. If you use a wiring board with another status, consult SEW-EURODRIVE. • The wiring board status is indicated in the first status field of the ABOX nameplate:...
  • Page 15 Safety Conditions Approved devices ® 3.2.2 MOVIFIT The following devices are permitted for use in applications with safe disconnection of the drive according to stop category 0 or 1 in accordance with EN 60204-1, fail-safe protec- tion against restart according to EN 1037, and fulfillment of safety category 3 in accor- dance with EN 954-1 and performance level "d"...
  • Page 16 • Certification is only valid as of status 11 of the wiring board. If you use a wiring board with another status, consult SEW-EURODRIVE. • The status of the wiring board is indicated in the first status field of the ABOX name-...
  • Page 17 • Certification is only valid as of status 11 of the wiring board. If you use a wiring board with another status, consult SEW-EURODRIVE. • The status of the wiring board is indicated in the first status field of the ABOX name-...
  • Page 18 • Certification is only valid as of status 11 of the wiring board. If you use a wiring board with another status, consult SEW-EURODRIVE. • The status of the wiring board is indicated in the first status field of the ABOX name-...

  • Page 19: Installation Requirements

    Safety Conditions Installation requirements Installation requirements • The lines from the safety control system (or the safety-oriented tripping device) and ® MOVIFIT terminal X29 are designated as safety-oriented control lines. • Power lines and safety-related control lines have to be installed in separate cables. ®...

  • Page 20: External Safety Controller - Requirements

    Safety Conditions External safety controller – requirements External safety controller – requirements INFORMATION The following requirements apply to binary control of safe disconnection. • In order to meet EN 954-1 requirements, at least one approval for safety category 3 according to EN 954-1 must be supplied, and disconnection of the safety-oriented control voltage must be designed at least for safety category 3 according to EN 954- •...

  • Page 21: External Sensors And Actuators - Requirements

    Safety Conditions External sensors and actuators – requirements External sensors and actuators – requirements INFORMATION The following requirements apply to using the PROFIsafe option S11. • The project planner and the operator of the system or machine are responsible for the choice and use of external sensors and actuators to connect to the failsafe inputs and outputs of PROFIsafe option S11.

  • Page 22: Hazard Caused By Drive Coasting

    Hazard Caused by Drive Coasting Hazard Caused by Drive Coasting WARNING Note that if the drive does not have a mechanical brake, or if the brake is defective, the drive may coast to a halt. Severe or fatal injuries. • If coasting to a halt causes hazards, depending on the application, additional pro- tective measures (e.g.

  • Page 23: Electrical Installation

    Electrical Installation Installation instructions Electrical Installation Installation instructions Important: In order to guarantee electrical safety and fault-free operation, you must ob- ® serve the basic installation instructions as well as the notes in the MOVIFIT operating instructions. Providing the requirements in the section entitled "Safety Requirements" and the wiring diagrams and notes given below are observed, ®...
  • Page 24 Electrical Installation ® Safe disconnection MOVIFIT MC and FC ® Safe disconnection MOVIFIT MC and FC ® 5.2.1 MOVIFIT Terminals relevant The following figure depicting the standard ABOX "MTA...-S01.-...-00" shows the termi- ® for safe disconnec- nals relevant for safe disconnection of MOVIFIT tion 2 3 4 5 6 11 12 13 1415 16...
  • Page 25 Electrical Installation ® Safe disconnection MOVIFIT MC and FC ® MOVIFIT MC wiring diagram for safe binary disconnection Line connection L1 L2 L3 ® MOVIFIT External safety relay or safety controller +24V_P 0V24_P 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 hybrid cable ®...

  • Page 26: Safe Disconnection Movifit ® Mc And Fc

    Electrical Installation ® Safe disconnection MOVIFIT MC and FC ® 5.2.2 MOVIFIT Terminals relevant The following figure depicting the standard ABOX "MTA...-S02.-...-00" shows the termi- ® for safe disconnec- nals relevant for safe disconnection of MOVIFIT tion 2 3 4 5 6 11 12 13 1415 16 1718 2 3 4...
  • Page 27 Electrical Installation ® Safe disconnection MOVIFIT MC and FC ® MOVIFIT FC wiring diagram for safe binary disconnection Line connection L1 L2 L3 Integrated frequency inverter External safety relay or safety controller +24V_P 0V24_P ® MOVIFIT U V W hybrid cable Braking resistor ϑ...
  • Page 28 Electrical Installation ® Safe disconnection MOVIFIT MC and FC ® 5.2.3 Group disconnection with MOVIFIT MC and FC Requirements With group drives, a single emergency stop relay can provide a safety-related 24 V volt- ® age supply for several MOVIFIT units.

  • Page 29: Profisafe Option S11

    Electrical Installation PROFIsafe option S11 PROFIsafe option S11 5.3.1 Standard ABOX The following connection terminals are relevant for operating the PROFIsafe option S11. ® The following figure shows the MOVIFIT FC connection board: 2 3 4 5 6 11 12 13 1415 16 1718 1 2 3 4 5 1 2 3 4 5...
  • Page 30 Electrical Installation PROFIsafe option S11 5.3.2 Hybrid ABOX The following terminals are relevant for operating PROFIsafe option S11. The following ® figure depicts the MOVIFIT MC connector board: 2 3 4 5 6 11 12 13 1415 16 1718 2 3 4 2 3 4 1 2 3 4 1 2 3 4...
  • Page 31 Electrical Installation PROFIsafe option S11 5.3.3 Power bus connection example The following figure shows an example of a power bus connection with two separate 24 V voltage circuits for the sensor/actuator supply. In this example, the 24V-C voltage supplies the S11 option as well as the safe inputs/outputs. 11 12 13 14 ®...
  • Page 32 Electrical Installation PROFIsafe option S11 5.3.4 Safety-related inputs and outputs of PROFIsafe option S11 Terminal X45 or M12 plug connectors X41 to X44 are used to connect the safety-related inputs (F-DIx) and the safety-related outputs (F-DOx and F-DO_STO). The following sections explain and describe the permitted connection options.
  • Page 33 Electrical Installation PROFIsafe option S11 Permissible wiring Only the following wiring is permitted in safety-related applications: a) Sensors, 1-pole connection (option of up to four 1-pole ® MOVIFIT with PROFIsafe option S11 sensors) F-SS0 F-SS1 F-DI00 F-DI01 F-DI02 F-DI03 4094993419 The following errors are detected via tests and monitoring functions: •...
  • Page 34 Electrical Installation PROFIsafe option S11 b) Sensors, 2-pole connection (up to two 2-pole sen- ® MOVIFIT with PROFIsafe option S11 sors possible) F-SS0 F-SS1 F-DI00 F-DI01 F-DI02 F-DI03 4094996107 INFORMATION • Important: With this type of connection, there is no internal link and no evaluation of discrepancy time between the two input signals of a sensor.
  • Page 35 Electrical Installation PROFIsafe option S11 • The safety-related binary outputs are 2-pole, designed as P-M switches, and con- trolled via PROFIsafe by a higher-level safety controller. • Actuators must generally be connected with the safe outputs F-DOx or F-DO_STO with a 2-pole connection between the P switch output to the M switch output. •...
  • Page 36 Electrical Installation PROFIsafe option S11 Internal tests and monitoring processes are able to detect various external faults. The following faults can be detected when the output is activated, • Short circuit between the P output and the reference potential • Short circuit between the M output and the +24 V supply voltage •...
  • Page 37 Electrical Installation PROFIsafe option S11 5.3.5 Safe disconnection with PROFIsafe ® ® In order to safely disconnect the MOVIMOT or MOVIFIT FC drive using PROFIsafe the safe output F-DO_STO must be connected with the 24 V voltage supply 24V_P (see the following figure).

  • Page 38: Startup With Profisafe Option S11

    Startup with PROFIsafe Option S11 Setting the PROFIsafe address Startup with PROFIsafe Option S11 INFORMATION ® • The basic startup procedure is described in the relevant MOVIFIT operating in- ® structions and the in the corresponding software manual "MOVIFIT Function ®...

  • Page 39: Configuring The Profisafe Option In Step7

    Startup with PROFIsafe Option S11 Configuring the PROFIsafe option in STEP7 Configuring the PROFIsafe option in STEP7 ® To ensure fault-free operation of MOVIFIT with PROFIsafe, you need the optional package entitled "Distributed Safety" as of version V5.4 for configuration and parame- terization under STEP7.
  • Page 40 Startup with PROFIsafe Option S11 Configuring the PROFIsafe option in STEP7 6.2.1 Parameterizing the PROFIsafe option S11 ® Select the F module in MOVIFIT slot 1. Make a right-click to open the context menu, select "Properties", then the "PROFIsafe" or "F parameters" tab. Below is an example of a PROFIBUS device. 4096019083 When the fieldbus or network systems starts up, the bus master sends the safety-rele- ®...
  • Page 41 Startup with PROFIsafe Option S11 Configuring the PROFIsafe option in STEP7 Parameter This parameter determines whether the ready counter (consecutive number) is to be in- "F_Check_ SeqNr" cluded in the consistency check (CRC calculation) of the F user data telegram. The PROFIBUS version supports the following setting: •...
  • Page 42 Startup with PROFIsafe Option S11 Configuring the PROFIsafe option in STEP7 Parameter This parameter defines a monitoring time in the failsafe PROFIsafe option S11. "F_WD_Time" A valid safety telegram must arrive from the F-CPU within this monitoring time. Other- wise the S11 option reverts to safe status. Select a monitoring time of a sufficient length so that communication can tolerate tele- gram delays, but also sufficiently short enough for your safety application to run without restriction.

  • Page 43: Data Exchange With Profisafe Option S11

    Data Exchange with PROFIsafe Option S11 Introduction Data Exchange with PROFIsafe Option S11 Introduction ® MOVIFIT units with integrated PROFIsafe option support parallel operation of standard and safety-relevant communication via a bus system or network. Safety-relevant PROFIsafe communication is possible both via PROFIBUS DP and PROFINET IO. ®...

  • Page 44: Access To F Periphery Of The Profisafe Option S11 In Step 7

    Data Exchange with PROFIsafe Option S11 Access to F periphery of the PROFIsafe option S11 in Step 7 Access to F periphery of the PROFIsafe option S11 in Step 7 For safety-related communication, PROFIsafe option S11 requires a total of 6 bytes for the PROFIsafe telegram portion and 6 bytes for the process image.
  • Page 45 Data Exchange with PROFIsafe Option S11 Access to F periphery of the PROFIsafe option S11 in Step 7 PASS_ON This variable lets you activate passivation of the PROFIsafe option S11. Provided that PASS_ON = 1, the F periphery is passivated. ACK_NEC After a fault has been corrected, the PROFIsafe option S11 is reintegrated, depending on ACK_NEC.
  • Page 46 Data Exchange with PROFIsafe Option S11 Access to F periphery of the PROFIsafe option S11 in Step 7 7.2.2 F user data of PROFIsafe option S11 2..7: reserved Output data 1: safe output F-DO01 ® Master >> MOVIFIT 0: safe output F-DO00 1..7: reserved reserved for storing 0: Safe torque...
  • Page 47 Data Exchange with PROFIsafe Option S11 Access to F periphery of the PROFIsafe option S11 in Step 7 You can activate the failsafe functions and the F periphery as well as the evaluation of the responses by the F periphery by using flags. Note that in STEP7 flags are only per- mitted for coupling between the standard user program and safety program.
  • Page 48 Data Exchange with PROFIsafe Option S11 Access to F periphery of the PROFIsafe option S11 in Step 7 4096029963 Manual – MOVIFIT® MC/FC – Functional Safety...
  • Page 49 Data Exchange with PROFIsafe Option S11 Access to F periphery of the PROFIsafe option S11 in Step 7 4096083851 Manual – MOVIFIT® MC/FC – Functional Safety...
  • Page 50 Data Exchange with PROFIsafe Option S11 Access to F periphery of the PROFIsafe option S11 in Step 7 4096087563 Manual – MOVIFIT® MC/FC – Functional Safety...

  • Page 51: Profisafe Option S11 - Response Times

    PROFIsafe Option S11 – Response Times PROFIsafe Option S11 – Response Times Response times play a decisive role in the design and execution of safety functions of systems and machines. In order to match the response time to the requirements of a safety function, always take the entire system from sensor (or control device) to actuator into account.

  • Page 52: Diagnostics With Profisafe Option S11

    Diagnostics with PROFIsafe Option S11 Diagnostics LEDs Diagnostics with PROFIsafe Option S11 Diagnostics LEDs This section describes the option-specific LEDs for PROFIsafe option S11. In the follow- ing figure, these LEDs are shown as dark. The following figure depicts the PROFIBUS ®...
  • Page 53 Diagnostics with PROFIsafe Option S11 Diagnostics LEDs 9.1.3 States of the LED "F-STATE" State Meaning Remedy F-STATE Green • The S11 Option is currently performing a cyclical data exchange with the F- Host. • Standard operating state. • Fault status in the safety part. •...

  • Page 54: Error Statuses Of Profisafe Option S11

    Diagnostics with PROFIsafe Option S11 Error statuses of PROFIsafe option S11 Error statuses of PROFIsafe option S11 INFORMATION Depending on the safety controller used, other terms may be used for "passivation" and "reintegration" in the safety controller documentation. For detailed information, refer to the safety controller documentation.
  • Page 55 Diagnostics with PROFIsafe Option S11 Error statuses of PROFIsafe option S11 9.2.3 Safety diagnostics via PROFIBUS DP The status of PROFIsafe communication and S11 option fault messages is transmitted to the DP master via a status PDU in accordance with the PROFIBUS DPV standard. The following figure shows how diagnostic data is organized for PROFIsafe communi- cation via slot 1.
  • Page 56 Diagnostics with PROFIsafe Option S11 Error statuses of PROFIsafe option S11 S11 option error The table below shows the fault codes of the S11 option: codes Byte 12 Byte 13 Designation Designation Meaning / error (German) (English) correction / 00 / 00 kein Fehler See PROFIsafe...
  • Page 57 Diagnostics with PROFIsafe Option S11 Error statuses of PROFIsafe option S11 9.2.4 Safety diagnostics via PROFINET IO The status of PROFIsafe communication and fault messages of the S11 option are re- ported to the PROFINET-IO controller where they can then be diagnosed. For more in- ®...
  • Page 58 Diagnostics with PROFIsafe Option S11 Error statuses of PROFIsafe option S11 9.2.5 Error table of PROFIsafe option S11 Error code/designation Response Cause Measure No error – – – Internal sequence • F-DOx = 0 (switch Safety electronics faulty, possibly • Check the installation (EMC) error off failsafe outputs)

  • Page 59: Technical Data

    Technical Data ® Technical data – MOVIFIT MC (safety technology) Technical Data ® 10.1 Technical data – MOVIFIT MC (safety technology) ® The table below provides the technical data for MOVIFIT MC (safety system). The ® technical data and approvals detailed in the MOVIFIT MC operating instructions must also be observed.

  • Page 60: Technical Data - Movifit ® Fc (Safety Technology)

    Technical Data ® Technical data – MOVIFIT FC (safety technology) ® 10.3 Technical data – MOVIFIT FC (safety technology) ® The table below provides the technical data for MOVIFIT FC (safety technology). The ® technical data and approvals detailed in the MOVIFIT FC operating instructions must also be observed.

  • Page 61: Technical Data - Profisafe Option S11

    Technical Data Technical data – PROFIsafe option S11 10.5 Technical data – PROFIsafe option S11 The table below shows the specific technical data of the PROFIsafe option S11: Designation Value Option voltage supply DC 24 V -15 % / +20 % according to EN 61131-2 24V_O Own consumption ≤...

  • Page 62: 10.6 Profisafe Option S11 Characteristic Safety Values

    Technical Data PROFIsafe option S11 characteristic safety values Designation Value Ambient temperature for the entire unit -25 °C to +40°C Climate class EN 60721-3-3, class 3K3 Storage temperature -25 °C to +85 °C (EN 60721-3-3, class 3K3) Permissible oscillation and impact load according to EN 50178 Overvoltage category III according to IEC 60664-1 (VDE 0110-1)

  • Page 63: Address List

    Address List Address List Germany Headquarters Bruchsal SEW-EURODRIVE GmbH & Co KG Tel. +49 7251 75-0 Production Ernst-Blickle-Straße 42 Fax +49 7251 75-1970 Sales D-76646 Bruchsal http://www.sew-eurodrive.de P.O. Box sew@sew-eurodrive.de Postfach 3023 • D-76642 Bruchsal Production / Indus- Bruchsal SEW-EURODRIVE GmbH & Co KG Tel.
  • Page 64 Centro Industrial Garin, Lote 35 Fax +54 3327 4572-21 Ruta Panamericana Km 37,5 sewar@sew-eurodrive.com.ar 1619 Garin http://www.sew-eurodrive.com.ar Australia Assembly Melbourne SEW-EURODRIVE PTY. LTD. Tel. +61 3 9933-1000 Sales 27 Beverage Drive Fax +61 3 9933-1003 Service Tullamarine, Victoria 3043 http://www.sew-eurodrive.com.au enquires@sew-eurodrive.com.au Sydney SEW-EURODRIVE PTY.
  • Page 65 Tel. +237 33 431137 Rue Drouot Akwa Fax +237 33 431137 B.P. 2024 electrojemba@yahoo.fr Douala Canada Assembly Toronto SEW-EURODRIVE CO. OF CANADA LTD. Tel. +1 905 791-1553 Sales 210 Walker Drive Fax +1 905 791-2999 Service Bramalea, ON L6T 3W1 http://www.sew-eurodrive.ca l.watson@sew-eurodrive.ca Vancouver SEW-EURODRIVE CO.
  • Page 66 Address List China Xi'An SEW-EURODRIVE (Xi'An) Co., Ltd. Tel. +86 29 68686262 No. 12 Jinye 2nd Road Fax +86 29 68686311 Xi'An High-Technology Industrial Development xian@sew-eurodrive.cn Zone Xi'An 710065 Additional addresses for service in China provided on request! Colombia Assembly Bogotá...
  • Page 67 Ahofer Str 34B / 228 Fax +972 3 5599512 58858 Holon http://www.liraz-handasa.co.il office@liraz-handasa.co.il Italy Assembly Solaro SEW-EURODRIVE di R. Blickle & Co.s.a.s. Tel. +39 02 96 9801 Sales Via Bernini,14 Fax +39 02 96 799781 Service I-20020 Solaro (Milano) http://www.sew-eurodrive.it sewit@sew-eurodrive.it...
  • Page 68 No. 95, Jalan Seroja 39, Taman Johor Jaya Fax +60 7 3541404 Service 81000 Johor Bahru, Johor sales@sew-eurodrive.com.my West Malaysia Mexico Assembly Quéretaro SEW-EURODRIVE MEXICO SA DE CV Tel. +52 442 1030-300 Sales SEM-981118-M93 Fax +52 442 1030-301 Service Tequisquiapan No. 102 http://www.sew-eurodrive.com.mx Parque Industrial Quéretaro scmexico@seweurodrive.com.mx...
  • Page 69 Service NL-3044 AS Rotterdam http://www.sew-eurodrive.nl Postbus 10085 info@sew-eurodrive.nl NL-3004 AB Rotterdam New Zealand Assembly Auckland SEW-EURODRIVE NEW ZEALAND LTD. Tel. +64 9 2745627 Sales P.O. Box 58-428 Fax +64 9 2740165 Service 82 Greenmount drive http://www.sew-eurodrive.co.nz East Tamaki Auckland sales@sew-eurodrive.co.nz Christchurch SEW-EURODRIVE NEW ZEALAND LTD.
  • Page 70 0393 Ustanicka 128a Fax +381 11 347 1337 PC Košum, IV sprat office@dipar.rs SRB-11000 Beograd Singapore Assembly Singapore SEW-EURODRIVE PTE. LTD. Tel. +65 68621701 Sales No 9, Tuas Drive 2 Fax +65 68612827 Service Jurong Industrial Estate http://www.sew-eurodrive.com.sg Singapore 638644 sewsingapore@sew-eurodrive.com...
  • Page 71 7 Christie Crescent Fax +27 13 752-8008 Vintonia robermeyer@sew.co.za P.O.Box 1942 Nelspruit 1200 South Korea Assembly Ansan-City SEW-EURODRIVE KOREA CO., LTD. Tel. +82 31 492-8051 Sales B 601-4, Banweol Industrial Estate Fax +82 31 492-8056 Service 1048-4, Shingil-Dong http://www.sew-korea.co.kr Ansan 425-120 master.korea@sew-eurodrive.com...
  • Page 72 Hayward, CA 94544 cshayward@seweurodrive.com Additional addresses for service in the USA provided on request! Venezuela Assembly Valencia SEW-EURODRIVE Venezuela S.A. Tel. +58 241 832-9804 Sales Av. Norte Sur No. 3, Galpon 84-319 Fax +58 241 838-6275 Service Zona Industrial Municipal Norte http://www.sew-eurodrive.com.ve...
  • Page 73 Address List Vietnam Ports, mining and offshore: Tel. +84 8 62969 609 DUC VIET INT LTD Fax +84 8 62938 842 Industrial Trading and Engineering Services totien@ducvietint.com A75/6B/12 Bach Dang Street, Ward 02, Tan Binh District, 70000 Ho Chi Minh City Hanoi Nam Trung Co., Ltd Tel.

  • Page 74: Index

    Index Index Block circuit diagram Functional description ® ® MOVIFIT FC, frequency inverters ......9 MOVIFIT FC, frequency inverter .......8 ® ® MOVIFIT MC............7 MOVIFIT MC .............6 Characteristic safety values General information ..........4 ® MOVIFIT FC ............60 Exclusion of liability..........5 ® MOVIFIT MC............59 Other applicable documentation ......5...
  • Page 75 Index Other applicable documentation ......5 Safe disconnection ® Group disconnection MOVIFIT MC/FC....28 ® MOVIFIT FC ............26 ® MOVIFIT MC ...........24 PROFIsafe option S11 ® MOVIFIT MC/FC..........24 Access to F periphery in Step 7 ......44 Safe Stop 1, function variant c (SS1(c)) ....12 Configuration in STEP7 ........39 Safe torque off (STO) ..........11 Data exchange...........43...
  • Page 76 Index Technical data............59 ® MOVIFIT FC, characteristic safety values ..60 ® MOVIFIT FC, safety technology.......60 ® MOVIFIT MC, characteristic safety values..59 ® MOVIFIT MC, safety technology......59 Option S11, characteristic safety values....62 PROFIsafe option S11 ........61 Manual – MOVIFIT® MC/FC – Functional Safety...
  • Page 80 SEW-EURODRIVE—Driving the world SEW-EURODRIVE Driving the world SEW-EURODRIVE GmbH & Co KG P.O. Box 3023 D-76642 Bruchsal/Germany Phone +49 7251 75-0 Fax +49 7251 75-1970 sew@sew-eurodrive.com www.sew-eurodrive.com...

This manual is also suitable for:

Movifit fc

Table of Contents