Bosch AdvancedDrill 18 Original Instructions Manual page 17

Apply pressure only in direct line with the bit and do
u
not apply excessive pressure.Bits can bend causing
breakage or loss of control, resulting in personal injury.
Additional safety information
Secure the workpiece. A workpiece clamped with
u
clamping devices or in a vice is held more secure than by
hand.
Always wait until the power tool has come to a com-
u
plete stop before placing it down. The application tool
can jam and cause you to lose control of the power tool.
Switch the power tool off immediately if the applica-
u
tion tool becomes blocked. Be prepared for high
torque reactions which cause kickback. The applica-
tion tool becomes blocked when it becomes jammed in
the workpiece or when the power tool becomes over-
loaded.
Use suitable detectors to determine if there are hid-
u
den supply lines or contact the local utility company
for assistance. Contact with electric cables can cause
fire and electric shock. Damaging gas lines can lead to ex-
plosion. Breaking water pipes causes property damage.
In case of damage and improper use of the battery, va-
u
pours may be emitted. Ensure the area is well-ventilated
and seek medical attention should you experience any ad-
verse effects. The vapours may irritate the respiratory
system.
Do not open the battery. There is a risk of short-circuit-
u
ing.
The battery can be damaged by pointed objects such
u
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
Only use the battery with products from the manufac-
u
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g.
against continuous intense sunlight, fire,
water, and moisture. There is a risk of explo-
sion.
Do not hold the power tool by the unlocking ring dur-
u
ing operation or transportation. Pulling on the unlock-
ing ring unintentionally can release the adapter and lead
to injuries or damage to the tool.
Technical Data
Article number
Rated voltage
No-load speed
Bosch Power Tools
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for driving and loosening screws
and for drilling in wood, metal, ceramic and plastic. The Ad-
vancedImpact 18 is also designed for impact drilling in brick,
masonry and stone.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Unlocking ring
(2) Tool holder
(3) Torque presetting ring
(4) Mode selector switch
(5) Right rotational direction indicator
(6) Left rotational direction indicator
(7) Electronic rotational direction switch
(8) Battery release button
(9) Battery
A)
(10) Handle (insulated gripping surface)
(11) Magnetic bit holder
(12) Light
(13) Battery charge indicator
(14) On/off switch
(15) Magnetic cap
(16) Screw holder
(17) Angle screw adapter
(18) Drill chuck adapter A)
(19) Off-set angle adapter
(20) Screwdriver bit A)
(21) Universal bit holder
A)
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Cordless drill/driver
AdvancedDrill 18
3 603 JB5 0..
V= 18
English | 17
A)
A)
A)
Cordless combi drill
AdvancedImpact 18
3 603 JB5 1..
18
1 609 92A 4BE | (07.09.2018)