Parts Description; Functional Description; Installing Or Removing Battery Cartridge - Makita DPP200 Instruction Manual

PARTS DESCRIPTION

1
2
3
4
5
6
1 Motor
5 Punch
9 Slide stopper
13 Trigger lock button
FUNCTIONAL
DESCRIPTION
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before adjusting or checking function on the tool.
Installing or removing battery
cartridge
CAUTION:
Always switch off the tool before
installing or removing of the battery cartridge.
CAUTION:
Hold the tool and the battery car-
tridge firmly when installing or removing battery
cartridge. Failure to hold the tool and the battery
cartridge firmly may cause them to slip off your hands
and result in damage to the tool and battery cartridge
and a personal injury.
14
13
12
11
10
9
8
7
2 Safety label
6 Die
10 Return lever
14 Battery cartridge
3 Pump case
7 Stripper
11 Oil port
- -
2
► 1 . Red indicator 2. Button 3. Battery cartridge
To remove the battery cartridge, slide it from the tool
while sliding the button on the front of the cartridge.
To install the battery cartridge, align the tongue on the
battery cartridge with the groove in the housing and slip
it into place. Insert it all the way until it locks in place
with a little click. If you can see the red indicator on the
upper side of the button, it is not locked completely.
8 ENGLISH
4 Punch retaining nut
8 C frame
12 Switch trigger
- -
1
3