Nokia 7368 ISAM ONT E-240G-B Product Manual page 90

Replace an E-240G-B ONU
11
12
13
14
90
Release 06.01.01 | June 2019 | Edition 09
Insert the ONU and faceplate assembly into the MNTS-A shelf and tighten the 2 panel
screws.
Reconnect the user cables, the power cable, and the PON cable.
Warning — Be careful to maintain a bend radius of no less than 1.5
inches (3.8 cm) when connecting the fiber optic cable. Too small of a
bend radius in the cable can result in damage to the optic fiber.
Caution — Be careful not to damage the PON connector. Consider
cleaning the connector before you insert it.
Repeat this procedure for any additional ONUs in the shelf that need to be replaced.
STOP. This procedure is complete.
3FE-46261-AAAA-TCZZA
7368 ISAM ONT E-240G-B Product Guide
Issue: 01