Maintenance - Lab.gruppen D Series Operation Manual

High–power installation platform
Hide thumbs Also See for D Series:
Table of Contents

Advertisement

14. Appendix
14. Appendix

14.3. Maintenance

During normal operation a D Series device provides trouble–free service. If the front panel display requires cleaning,
use a soft cloth only; do not use solvent cleaners.
The dust filters on both sides of the front panel, behind the grilles, should occasionally be removed and cleaned to
ensure maximum airflow through the device. Disconnect the unit from mains power prior to removing dust the filter,
and ensure the dust filter is replaced prior to turning the unit back on.
In extreme cases it may be necessary to clean the inside of the device. This procedure should only be carried out
by qualified service personnel. Internal cleaning may be necessary if the device has had prolonged operation in an
extreme environment such as one where cracked oil smoke machines are in use. If the device is used in extreme
conditions, it is recommended to have it serviced every three years as a preventative measure.
49
48
D SERIES Lake Operation Manual rev 3.0.4
D SERIES Lake Operation Manual rev 3.0.3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

D 200:4lD 120:4lD 80:4lD 40:4lD 20:4lD 10:4l

Table of Contents