Maintenance; Oiling The Trimmer Blade; Preparing The Battery Pack For Recycling - Toro PowerPlex 51136 Operator's Manual

Maintenance

Disconnect the product from the power supply (i.e.
remove the plug from the power supply or the battery
pack) before maintenance or cleaning work.
Use only the manufacturer's recommended
replacement parts and accessories.
Inspect and maintain the product regularly. Have the
product repaired only by your Authorized Service
Dealer.

Oiling the Trimmer Blade

Note:
Oil the trimmer blade before and after each
use.
1. Stop the motor and remove the battery.
2. Clean dirt and debris from the body of the
hedge trimmer, using a damp cloth with a mild
detergent.
Note:
Do not use any strong detergents on
the plastic housing or the handle. They can be
damaged by certain aromatic oils, such as pine
and lemon, and by solvents such as kerosene.
3. Lay the hedge trimmer on a flat surface. Apply
light-weight machine oil along the edge of the
top blade. If you will be using the hedge trimmer
for an extended period of time, oil the blade
during use.
Note:
Do not oil the hedge trimmer while it is
running.
Storage
Important:
Store the tool, battery pack, and
charger only in temperatures that are within the
appropriate range; refer to
Important:
If you are storing the tool for a year
or longer, remove the battery pack from the tool
and charge the battery pack until 2 or 3 LED
indicators turn blue on the battery. Do not store a
fully charged or fully depleted battery. When you
are ready to use the tool again, charge the battery
pack until the left indicator light turns green on
the charger or all 4 LED indicators turn blue on
the battery.
•
Clean all foreign material from the product.
•
Store the tool, battery pack, and battery charger
in a well-ventilated place that is inaccessible to
children.
•
Keep the tool, battery pack, and battery charger
away from corrosive agents such as garden
chemicals and de-icing salts.
Specifications (page
•
To reduce the risk of serious personal injury, do
not store the battery pack outside or in vehicles.
•
Store the tool, battery pack, and battery charger
in an enclosed clean, dry area.
Preparing the Battery Pack
for Recycling
Important:
Upon removal, cover the terminals of
the battery pack with heavy-duty adhesive tape.
Do not attempt to destroy or disassemble the
battery pack or remove any of its components.
Lithium-ion battery packs must be recycled
or disposed of properly at the nearest battery
recycling facility.
For more information on recycling lithium-ion
battery packs and to locate the battery
recycling facility closest to you, visit
www.Call2Recycle.org (US and Canada only).
If you are located outside of the US and
Canada, please contact your authorized Toro
distributor.
8).
12