Roll Off (Parameter Sweep) - Agilent Technologies E5022A Operation Manual

Roll Off (Parameter Sweep)

Overview This section describes the Roll Off measurement. Roll Off measurement is used to measure
the TAA and Narrow Band TAA.
Measurement
1. To open the Roll Off menu, click on the [Roll Off] button from the Parameter Sweep
Procedure
frame of the Measure menu.
Figure 3-63 Roll Off Menu
NOTE
Before you execute this measurement, you should set an appropriate input range or execute
the Auto Configuration to set the input range automatically.
2. Select desired measurement from the rolloff menu.
3. Set the parameters, click on each button to enter a new value.
Chapter 3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
VEE Measurement Program Operation
Measurement
117