iRobot Roomba 900 Series Manual page 2

iRobot HOME App Battery Status
You can easily check the status of the battery in the iRobot HOME App.

A battery icon will be displayed in the top-right corner, indicating the current status of the
battery.
The CLEAN screen will display "Ready to clean. Charging," indicating that the battery

is not yet fully charged. Roomba may run shorter than expected.
The CLEAN screen will display "Ready to clean. Fully charged," indicating that the

battery is fully charged. Roomba is ready to perform a cleaning cycle.
Reduced Power Standby Mode
Roomba consumes a small amount of power any time it is on the Home Base to ensure it is ready
for its next cleaning job, as well as to maintain Wi-Fi connectivity. It is possible to put Roomba
in a further-reduced power state when not in use. For instructions and more details on this
Reduced Power Standby Mode, refer to the iRobot HOME App and navigate to
Settings ➔ Reduced Power Standby Mode.
The Wi-Fi Setup Process for a Wi-Fi Connected Roomba
Use the following information to go through the Wi-Fi setup process.
1. Download the iRobot HOME App onto your mobile device.
iOS: Compatible with Operating Systems 10 and higher.
Android: Compatible with Operating Systems 5.0 and higher.
2. Place the Home Base in an area with no obstacles and a good Wi-Fi coverage, and then
connect it to power.
More ➔