PEAKnx wantec Monolith C IP Manual page 18

EN Set up of an wantec doorstation with a PEAKnx touch panel
19. You can set the languages at the top right corner of the page.
20. Under Network Setting->SIP parameters, under „SIP mode:", select „SIP server".
21.
Under „Account" and „Password", enter the authentication name and the password
which you have assigned for the wantec door station in the Fritzbox.
■
You can also find your login data and registrar (Registration server) under fritz.
box-> Telephony devices, if you edit the created door intercom system and switch
to the „Login data" tab.
22. The status should now show „Registration successful".
23. To control the door opener, you can edit the opening DTMF code and time of the
opening interval [sec] under Basic Settings-> Relay.
■
This means, if you set the „55" as opening code and want to open the door after
accepting a call from the door intercom, simply press „55" on the
number field.
24. To use the door station with the Controlpro set the microphone level of the Controlpro
to 0.
■
To do this, right-click or long-press the loudspeaker icon in the taskbar and select
„Sounds".
18
www.peaknx.com
Bria Solo Free