Avaya Merlin Magix Configuration Note page 2

Avaya
C o m m u n i c a t i o n s A p p l i c a t i o n s G r o u p
O100 Ordering Information
This integration will support 16
ports.
Avaya Merlin Magix Hardware
Requirements
Avaya Merlin Magix Software
Requirements
Additional Material Requirements
Octel 100 Configuration Note (7007)
Avaya Merlin Magix
2.0 ORDERING INFORMATION
There are many options available for this product, depending on the
application. Voice Boards supported:
Dialogic DIALOG/4 ™
Fax Boards supported:
®
Brooktrout TruFax
Optional Remote Service
Internal Modem
Please consult with your sales representative.
3.0 AVAYA MERLIN MAGIX HARDWARE REQUIREMENTS
One single line port for each Octel 100 port. This may be
<
provided by
−
016TRR
16-tip/ring extension jacks with 4 touch-tone
Receivers (TTRs).
or
016ETR 16 ETR extension jacks including 6 with tip/ring
<
functionality with 4 touch-tone receivers
491D1 Power Supply Module:
<
−
Equipped with optional 129B Frequency Generator 30 Hz.
or
−
Equipped with optional 129C Frequency Generator 25 Hz.
Note: A TTR is needed by an analog port whenever DTMFs are being
processed. The number of TTRs is dependent on the number of
analog ports and the loading of those ports. A good estimation is
0.75 TTRs per port for a moderately loaded system.
3.1 AVAYA MERLIN MAGIX SOFTWARE REQUIREMENTS
Release 1,or 2.
<
3.2 ADDITIONAL MATERIAL REQUIREMENTS
The voice board used to interface Octel 100 VoiceMail is a four-port
board. System configurations may reflect partial use of a board. The
board used to interface Octel 100 FaxMail is a two-port board. You will
need:
One RJ-14 jack with 4-conductor line cord for every two Octel
<
100 ports.
For optional remote service access:
<
−
One analog line
−
One RJ-11 Jack for above and 2-conductor modular
telephone cord.
The information contained in this document is provided by AVAYA Inc. to serve as a guide. See the
Avaya Inc. PROPRIETARY. Use pursuant to Company instructions
C o n f i d e n t i a l
200
disclaimer on page 1
2
P a g e