Table of Contents
Advertisement
Enabling Wi-Fi functionality for the
Polycom VVX450
By default, the Polycom VVX450 is configured to connect via a wired connection. To enable the Wi-
Fi functionality a USB Wi-Fi dongle needs to be connected to the device and the Wi-Fi option needs
to be enabled from within the menu.
Start by inserting the USB Wi-Fi dongle into the USB port on the rear of the device. The Wi-Fi mode
then needs to be enabled.
This can be done by following the below menu sequence:
Entering the Main Menu and navigating down to option 7 "Wi-Fi"
Horizon
|
Polycom VVX450 Full User Guide
© Gamma 2016. All rights reserved. Confidential
Page
22
of
26
Hide quick links:
Advertisement
Table of Contents
