Ip Desk Phone; Telephone Interface Cable - Plantronics Poly Savi 8200 Series Quick Start Manual

IP DESK PHONE

All IP desk phones should support basic connectivity and functionality
via the included telephone interface cable. Use the diagram below to
assist in setting up your system.

TELEPHONE INTERFACE CABLE

1. Connect the large end of the telephone interface cable to the
base unit. Connect the other end to your IP desk phone. If your
IP Desk phone has a headset port, it is best to use it. If your IP
desk phone has no headset port, you may connect the telephone
interface cable to the handset cable as shown above.
2. Connect the power cable to the base and plug the power adapter
into an electrical outlet.
3. Place the headset onto the base to charge. Please allow at least
20 minutes initial charge time.
Headset Port
OR
No Headset Port
6