Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for LG LU660H-S Series
Summary of Contents for LG LU660H-S Series
- Page 1 INSTALLATION MANUAL LED TV* * LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. LU660H-S* www.lg.com Copyright © 2018 LG Electronics Inc. All Rights Reserved.
-
Page 2: Table Of Contents
Introduction External Speaker Ez-Manager Wizard Set ID Setup - Automatically for Setup Power Saving - Manually for Setup HCEC Setup - USB LG Smart Install Utility Clock Setup Password Change INSTALLATION MENU Preloaded App Lock Mode Introduction MEDIA SHARE PUBLIC DISPLAY SETTINGS... -
Page 3: Location And Function Of Controls
LOCATION AND FUNCTION OF CONTROLS Parts and Button Basic functions Adjusting the Menu When the TV is turned on, press the button Power On (Press) one time. You can adjust the Menu items Power Off (Press and Hold) using the button. Menu control (Press Turns the power off. -
Page 4: Ezmanager
EZMANAGER * Image shown may differ from your TV. Introduction The Pro:Centric Platform enables you to simply install, manage and use guest-centric solutions. The default Domain ‘procentric.local’ and IP Server Address are needed to be registered in DNS TV will contact the IP Server using the default Domain ‘procentric.local’... -
Page 5: Automatically For Setup
Automatically for Setup 1 From the TV Configuration Options screen, you can choose how to proceed with the configuration of this TV. Whether you will configure the TV for Pro:Centric operation via the Room wizard or use a USB memory device to configure the TV, you may first wish to set the Number on the TV. - Page 6 • If you intend to set network, use the Network Settings option. You can connect easily to wired/ wireless network by this option. (page. 19)
- Page 7 2 This step automatically searches for the Pro:Centric Server. If was found the Pro:Centric data channel, select the NEXT.
- Page 8 Downloading the Pro:Centric application files takes few minutes. 4 After the installation is completed, the following screen will be displayed.
-
Page 9: Manually For Setup
Manually for Setup 1 Select a Label and/or enter the Room Number using the numeric keypad on the remotes or using the virtual keyboard on the TV screen. To continue, move and select NEXT. Please select the MANUAL PRO:CENTRIC. - Page 10 3 Configure the appropriate Pro:Centric settings in the TV.
- Page 11 4 Downloading the Pro:Centric application files takes few minutes. 5 After the installation is completed, the following screen will be displayed.
-
Page 12: Usb Lg Smart Install Utility
USB LG Smart Install Utility 1 Select the USB CONFIGURATION > MANAGER. - If you have USB Memory for ‘LG_DTV’ or ‘lg_dtv’ folder, this step shows the USB file list for downloading the items. 2 Downloading the files takes few minutes. -
Page 13: Installation Menu
Public Display Settings. The wide range of hotel features can be performed simply on additional window to enhance the LG hotel TV’s easy installation and convenient operation for Hotelier and System Integrators. * Image shown may differ from your TV. -
Page 14: Public Display Settings
PUBLIC DISPLAY SETTINGS * Image shown may differ from your TV. 1 Use the button to select the Public Display Settings. 2 Use the OK button and then button to select Public Display Mode. - When Public Display Mode is set to (Work), all functions of Public Display Mode apply. -
Page 15: Power On Status
Power On Status • Decide to select working status of TV Set when turn on main power. • You can set with PWR, STD, LST. • always make TV set On status when turn on main power . • make Stand-by status when turn on main power. •... -
Page 16: Key Management
• Manage key usability of Local(Front) Key and Remote Control. When selected to On, following Operation Local Key Operation will be worked by below. IR Operation Decide whether work the LG remote control or not. • When IR Operation is set to Normal, all remote keys are available. Use PWR Only •... -
Page 17: Menu Display
Menu Display Function to decide whether work with menu (including relevant menus too) of control – Enter possible) or not (Off – Enter Impossible). • Although select (Enter impossible), the action that press a Menu button for 5 seconds to enter installation menu is available. •... -
Page 18: Power On Default
Power On Default Set the channel to display and Volume Level, etc. when turn on power in AC Power On or Stand-by status. • Set to (Work) or (Do Not Work). • When Power On Default is set to Off, it is not applied to the subordinate Input, Channel, A/V Setting, Aspect Ratio menu. -
Page 19: Network
NETWORK 1 Use the button to select the Network. MAC Address Displays the MAC address. (Not customizable). Network Setting One-click network connection • Connects easily to a wired/wireless network. • Network Connection to connect to an available network automatically. Follow the prompts on the To connect to a network through Set Expert •... -
Page 20: Lg Connect
LG Connect * Depending upon model Sets the LG Connect function to on or off. • You can connect TV via LG TV Plus app in smart device. • Default setting is On. IP Stream Control Audio PTS Offset - Controlling output stream timing of audio. -
Page 21: Pro:centric
PRO:CENTRIC 1 Use the button to select the Pro:Centric. Mode Pro:Centric Sets whether or not enable and the service method. • You can set to Off, Configuration Only, FLASH, HTML using the button. The default value is Off; when it is set to Off, all the sub items are disabled. (Except for Update Event, Room... -
Page 22: Media Type
Media Type Sets the medium type to RF or IP. The default value is RF. • Data Channel - Sets the Channel at which the Pro:Centric data is received. • P:C IP Setting - Server Address is set to IP Address (IP Address) Set IPv4 address in 4 octets. -
Page 23: General
GENERAL Configuration Setup (1) Select RCU It is a mode to set whether to use Select RCU or not. When Select RCU is set to Enable, You can Number of RCU adjust menu. (2) Number of RCU It is a mode to set Number of RCU. -
Page 24: External Speaker
(6) Auto Sensing Auto Sensing is set to On, the input is automatically switched when the input signal that you • If set to is received. • If Auto Sensing is set to Off, the input is not switched when the input signal is received. SIMPLINK SIMPLINK is set to On, Auto Sensing... -
Page 25: Power Saving
HCEC and TVLink-CEC. • If Default is selected, you can use SIMPLINK which is provided in LG TV. Also you can enable and disable SIMPLINK through SIMPLINK MENU. HCEC • If is selected, you can use TVLink-HCEC Protocol. For more detailed information,... -
Page 26: Clock Setup
Forced Initialize • This setting will be enabled When CEC mode is set as TVLink-CEC. • If Enable is selected, TV will change its input source to HDMI1 by any HDMI-CEC simulation from a device. HTNG Public Display Mode • If the following options are selected because of the HTNG command: * Power On Default, Start Volume,... -
Page 27: Preloaded App
Preloaded App 1 If you want to use a particular app, you can choose from the menu. you can setting each apps activation. 2 You can check or uncheck by pressing OK button. Lock Mode Lock Mode is Yes, the following features will be unavailable. •... -
Page 28: Media Renderer
Media Renderer • Media Renderer enables the TV to act as a Media Renderer device to receive content from DLNA Certifi ed devices on the same network. DIAL • With this DIAL service, you can launch the target app at Smart Home Launcher bar without select the target app by remote controller. -
Page 29: Tv Manager
TV MANAGER USB Download Menu USB Cloning An Installer can quickly set up and clone multiple TV sets at a property. These cloned TVs will all have the same Master TV Setup: Public Display Settings, Installation menu settings, User A/V settings and the Channel Map. - Page 30 Ez Download • Ez Download is a function that enables users to download the desired items all at once, such as EPK (software update file), TLL, Logo Image, Background Images, Micom. - Images and EPK files should be copied into the folder named LG_DTV on the USB. •...
- Page 31 Logo Image Download • If there are more than two USB Memory Device, It is possible to select the USB. Logo Image Download > Select Images > UPDATE. • The download sequence is NOTE • Splash Image update function supports only JPEG, BMP format file of less than 8 MB file size. •...
- Page 32 Insert Background Image(s) • This feature downloads Insert Background Image(s) from USB. • Images should be copied to ‘LG_DTV’ of the USB. • The download sequence is Insert Background Image(s) > Select Images > UPDATE. NOTE • Maximum number of images that you can update at once are 12. •...
- Page 33 Update TV Software • This feature updates TV software through the EPK file in USB. The target file is located in ‘LG_DTV’ folder. • If there are more than two USB memory Device, It is possible to select the USB. •...
- Page 34 Import Clone File • Once the internal TV data and its channel map information is written to the USB memory card, the user can start Import Clone File process with the data file generated and stored in USB Export Clone File memory card.
-
Page 35: Diagnostics
Diagnostics • Sets Enable or Disable. When it is set to Disable, user can’t control TV via RMS. The changed setting is applied after reboot. -
Page 36: Key Codes
KEY CODES * This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) R/C Button (Dash) / R/C Button R/C Button R/C Button R/C Button (Blue) R/C Button R/C Button (Yellow) R/C Button R/C Button R/C Button (Green) R/C Button... -
Page 37: External Control Device Setup
USB to Serial converter with USB Cable USB Type (TV) (PC) • LG TV supports PL2303 chip-based (Vendor ID : 0 x 0557, Product ID : 0 x 2008) USB to serial RS-232C IN converter which is not made nor provided by LG. (CONTROL & SERVICE) -
Page 38: Set Id
Connector type : D-Sub 9-pin male RS-232C (Serial port) RS-232C configurations 7-Wire Configurations 3-Wire Configurations (Standard RS-232C cable) (Not standard) D-Sub 9 D-Sub 9 D-Sub 9 D-Sub 9 Set ID For Set ID number, see “Real data mapping (Hexadecimal : Decimal)”. 1 Press to access the main menus. -
Page 39: Communication Parameters
Communication Parameters • Baud rate : 9600 bps (UART) • Stop bit : 1 bit • Data length : 8 bits • Communication code : ASCII code • Parity : None • Use a crossed (reverse) cable. Command reference list * (Depending upon model) COMMAND1 COMMAND2... -
Page 40: Transmission / Receiving Protocol
TRANSMISSION / RECEIVING PROTOCOL * (Depending upon model) Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the set ID to choose desired monitor ID number in option menu. Adjustment range is 1 to 99. - Page 41 1 Power (Command: k a) 3 Screen Mute (Command: k d) ►To control power on or off of the set. ►To select screen mute on/off. Transmission Transmission [k][a][ ][Set ID][ ][Data][Cr] [k][d][ ][Set ID][ ][Data][Cr] Data 00 : Data 00 : Screen mute off (Picture on) / Video Data 01 : mute off Data 01 : Screen mute on (Picture off )
- Page 42 Brightness Select (Command: k l) (Command: k h) ►To adjust screen brightness. You can also ►To select OSD (On Screen Display) on/off adjust brightness in the picture settings. when controlling remotely. Transmission Transmission [k][h][ ][Set ID][ ][Data][Cr] [k][l][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 Data 00 : Data 01 :...
- Page 43 Bass (Command: k s) (Depending upon model) [v][ ][Set ID][ ][OK/NG][Data][x] ►To adjust bass. You can also adjust Bass in * It depends on model, and can adjust when the audio settings. sound mode is EQ adjustable value. Transmission Energy Saving (Command: j q) [k][s][ ][Set...
- Page 44 • Digital Antenna/Cable/Satellite Transmission [m][a][ ][0][ ][Data 00][ ][Data 01][ ] [Data 00][Data 01]: Channel Data Data 00 : High byte channel data [Data 02][ ][Data 03][ ][Data 04][ ][Data 05][Cr] Data 01 : Low byte channel data - Digital channels have a Physical, Major, and - 00 00 ~ 27 0F (Decimal: 0 ~ 9999) Minor channel number.
- Page 45 • Tune Command Examples: • Tune Command Examples: 1 Tune to the Analog cable (NTSC) channel 1 Tune to the digital antenna (ISDB-T) channel 17-1. Set ID = All = 00 Set ID = All = 00 Data 00 = Channel Data is 35 = 23 Data 00 = Don’t know Physical = 00 Data 01 &...
- Page 46 22 Control Backlight (Command: m g) ►To control the backlight. Transmission [m][g][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 [g][ ][Set ID][ ][OK/NG][Data][x] 23 Input select (Command: x b) (Main Picture Input) ►To select input source for main picture. Transmission [x][b][ ][Set...
Need help?
Do you have a question about the LU660H-S Series and is the answer not in the manual?
Questions and answers