Table of Contents
Advertisement
Media Renderer
• Media Renderer enables the TV to act as a Media Renderer device to receive content from
DLNA Certifi ed devices on the same network.
DIAL
• With this DIAL service, you can launch the target app at Smart Home Launcher bar without
select the target app by remote controller. The target app should be already selected at
Installer Menu >
TV Name
• When other media device (ex: smart phone, desktop, laptop) searching TV, this string was
displayed.
SoftAP
- If you want to use
SoftAP
is a function of TV which is used like Access Point.
- Regardless of the
(Depending upon model)
•
Use Default
- If you want to use default password (this password was generated randomly), you must
select
Enable
•
Security Key
- When guests want to use TV's
change this default password, you need to Change
•
Wi-Fi Signal Strength
- You can control wireless signal strength on
you select
•
Wi-Fi Channel
- You can control wireless channel on
channel. If you select Auto, wireless channel of
28
General
Preloaded
>
SoftAp
menu on
Media Share
Instant On
mode, the
in this item.
SoftAP
Not
Used, wireless signal strength will be set to Max value.
App.
menu, you must select
SoftAP
setting stays unchanged after power off/on.
function, they need this password. If you want to
Use Default
SoftAP
mode. This is controlled by 5 step. If
SoftAP
mode. This is controlled from 1 to 11
SoftAP
will be set to random channel.
On
in this item. The
value into Disable.
Advertisement
Table of Contents
