Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for LG LU340L-U Series
Summary of Contents for LG LU340L-U Series
- Page 1 INSTALLATION MANUAL LED TV* * LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. LU340L-U* www.lg.com Copyright © 2017 LG Electronics Inc. All Rights Reserved.
-
Page 2: Table Of Contents
TABLE OF CONTENTS INSTALLATION MENU KEY CODES Introduction EXTERNAL CONTROL DEVICE PUBLIC DISPLAY SETTINGS SETUP Public Display Settings (ATSC) RS-232C Setup Power On Status USB to Serial converter with USB Cable Volume (0 ≤ Min ≤ Start ≤ Max ≤ 100) RS-232C with RS-232C Cable - Start Volume Set ID... -
Page 3: Installation Menu
Public Display Settings. The wide range of hotel features can be performed simply on additional window to enhance the LG hotel TV’s easy installation and convenient operation for Hotelier and System Integrators. * Image shown may differ from your TV. -
Page 4: Public Display Settings
PUBLIC DISPLAY SETTINGS * Image shown may differ from your TV. 1 Select Public Display Settings. When Public Display Settings is set to (Work), all functions of Public Display Settings apply. Public Display Settings (ATSC) • Decide to work all functions of Public Display Settings or not by setting Public Display Settings... -
Page 5: Power On Status
Power On Status • Decide to select working status of TV Set when turn on main power. • You can set with PWR, STD, LST. • always make TV set On status when turn on main power . • make Stand-by status when turn on main power. •... -
Page 6: Key Operation
• Manage key usability of Local(Front) Key and Remote Control. When selected to On, following Operation Local Key Operation will be worked by below. IR Operation Decide whether work the LG remote control or not. • Able to set Normal, Use PWR Only, Block All... -
Page 7: Limited Mode
Limited Mode Configure TV function’s limitation. When selected to On, following sub-menus will be worked by below. Setup Menu Decide to enter Channels of user menu as (Enter possible) or (Enter impossible). • When Setup Menu is set to Channels - The of user menu is disabled. -
Page 8: Menu Display
Menu Display Function to decide whether work with menu (including relevant menus too) of control – Enter possible) or not (Off – Enter Impossible). • Although select (Enter impossible), the action that press a Menu button for 5 seconds to enter installation menu is available. •... -
Page 9: Dtv Channel Update
DTV Channel Update It is a mode to set whether to update DTV channel information automatically or not. DTV Channel Update is set to Auto, the function to update TV’s channel map according to • When DTV channel’s stream information •... -
Page 10: A/V Setting
A/V Setting A/V Setting is changed from to On, parameters that are set before entering installation menu are applied whenever turn on power. • Following Parameters are applied to basic. - Picture section - PSM mode, Picture Data (Contrast, Brightness, Color, Sharpness, Tint) - Sound section - SSM mode, Sound Data (Balance, Equalizer Data) - AVL (Auto Volume Level) and Language, Teletext language, ARC Data. - Page 11 Public Display Settings Item Enable Disable Initial Public Display Settings Power On Status LST, STD, Volume Start Volume Off, Minimum Volume Maximum Volume Maximum Volume Minimum Volume Minimum Volume Maximum Volume Key Operation IR Operation Normal Use PWR Only Block All Normal Local Key Operation Normal...
-
Page 12: Tv Manager
SPI Boot or LG Boot Logo. If you checked the LG Boot Logo checkbox, then the Splash image, if selected, will be unchecked. Also, if you select the LG Boot Logo and proceed with the download, the existing Splash image will be deleted. - Page 13 USB Cloning An Installer can quickly set up and clone multiple TV sets at a property. These cloned TVs will all have the same Master TV Setup: Public Display Settings, Installation menu settings, User A/V settings and the Channel Map. This newer procedure significantly decreases the installation time that would be necessary if the standard RS-232C method were used instead.
- Page 14 Receive From USB * Image shown may differ from your TV. 1 Plug USB memory card into the USB port of the TV. 2 Use the TV Manager button to select the option and then press the OK button. 3 Use the Receive from USB button to select the and press the OK button.
- Page 15 Send To USB * Image shown may differ from your TV. 1 Plug USB memory card into the USB port of the TV. 2 Use the TV Manager button to select the option and then press the OK button. 3 Use the Send to USB button to select the and press the OK button.
- Page 16 Logo Image Download Make a ‘LG_DTV’ folder on the USB flash drive and then copy the splash image file to that folder. * Image shown may differ from your TV. /DVI IN (RGB) COMPONENT AUDIO IN OPTICAL (COMPONENT/RGB/DVI) AUDIO OUT SPEAKER ANTENNA/ RGB IN (PC)
-
Page 17: Diagnostics
Diagnostics Diagnostics Setup Introduction This diagnostic function provides current status information of the TV in XML file format using a USB Signal Tracer Set device. If the user sets a signal standard level, checks the signal strength status of the digital channel that the user tuned to. It checks and records good and bad channel signals, and then provides the signal information to a USB storage device in XML file format. - Page 18 (2) Saving some status information of the TV set through USB in XML file format • Create an LG_SVC folder on the USB on a PC. • Create an empty file named tv_signal.rms in the LG_SVC folder. • Insert the USB device into the TV. •...
-
Page 19: General
GENERAL Password Change * Image shown may differ from your TV. - To ensure more security, Password can be changed by installers’ own design. 1 Go to General -> Password Change. 2 Enter four digit password. 3 Input the password again for confirmation. Set ID Setup 1 Go to General... -
Page 20: Configuration Setup
Configuration Setup * Image shown may differ from your TV. (1) Number of RCU • It is a function to set whether to use Select RCU or not and set number of RCU. • When Number of RCU is set to 0, this function do not use. •... - Page 21 (5) Auto Sensing • The input is automatically switched when the input signal that you set to is received. • If Auto Sensing is set to Off, the input is not switched when the input signal is received. • If SIMPLINK is set to On, HDMI...
-
Page 22: Time Scheduler
Time Scheduler 1 Go to General -> Configuration Setup -> Time Scheduler. (1) Time Scheduler • It is a mode to set whether to use or not. Time Scheduler is set to On, You can adjust ON TIME SETTING, OFF TIME SETTING •... -
Page 23: Hcec Setup
HCEC Setup 1 Go to General -> HCEC Setup. (1) HCEC Setup • When HCEC Setup is set to Mode, You can adjust Decoding, Device StandBy menu and SIMPLINK feature automatically changed to the on state, and the user can not change this status. (a) IR Decoding •... -
Page 24: Insert Image
Insert Image This feature allows you to display an image you have stored on the TV instead of the LG Cube when there is no signal due to DTV signal attenuation, external device failure, or cable removal. 1 Go to... -
Page 25: Welcome Video
Welcome Video * (Depending upon model) • This feature allows you to download videos via USB storage to display on your TV after your TV boots up and the boot logo appears. 1 Go to General -> Welcome Video. (1) Welcome Video •... -
Page 26: Font Option
Font Option * (Depending upon model) * Image shown may differ from your TV. 1 Go to General -> Font Option. Regular or Big. (Initial : Regular) • Set to • When Font Option is set to Big, TV displays enlarged Channel Banner & Volume UI. Clock Display * (Depending upon model) * Image shown may differ from your TV. -
Page 27: Key Codes
KEY CODES * This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) R/C Button R/C Button R/C Button (Dash) / R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button (Blue) -
Page 28: External Control Device Setup
USB to Serial converter with USB Cable USB Type (TV) (PC) • LG TV supports PL2303 chip-based (Vendor ID : 0 x 0557, Product ID : 0 x 2008) USB to serial RS-232C IN converter which is not made nor provided by LG. (CONTROL & SERVICE) -
Page 29: Set Id
Connector type : D-Sub 9-pin male RS-232C (Serial port) RS-232C configurations 7-Wire Configurations 3-Wire Configurations (Standard RS-232C cable) (Not standard) D-Sub 9 D-Sub 9 D-Sub 9 D-Sub 9 Set ID For Set ID number, see “Real data mapping (Hexadecimal : Decimal)”. 1 Press (Settings) to access the main menus. -
Page 30: Communication Parameters
Communication Parameters • Baud rate : 9600 bps (UART) • Stop bit : 1 bit • Data length : 8 bits • Communication code : ASCII code • Parity : None • Use a crossed (reverse) cable. Command reference list * (Depending on model) COMMAND1 COMMAND2... -
Page 31: Transmission / Receiving Protocol
TRANSMISSION / RECEIVING PROTOCOL * (Depending on Model) Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the set ID to choose desired monitor ID number in option menu. Adjustment range is 1 to 99. - Page 32 1 Power (Command: k a) 3 Screen Mute (Command: k d) ►To control power on or off of the set. ►To select screen mute on/off. Transmission Transmission [k][a][ ][Set ID][ ][Data][Cr] [k][d][ ][Set ID][ ][Data][Cr] Data 00 : Data 00 : Screen mute off (Picture on) / Video Data 01 : mute off...
- Page 33 Brightness 11 OSD Select (Command: k l) (Command: k h) ►To adjust screen brightness. You can also ►To select OSD (On Screen Display) on/off adjust brightness in the picture settings. when controlling remotely. Transmission Transmission [k][h][ ][Set ID][ ][Data][Cr] [k][l][ ][Set ID][ ][Data][Cr] Data...
- Page 34 14 Bass (Command: k s) (Depending on model) [v][ ][Set ID][ ][OK/NG][Data][x] ►To adjust bass. You can also adjust Bass in * It depends on model, and can adjust when the audio settings. sound mode is EQ adjustable value. Transmission 18 Energy Saving (Command: j q) [k][s][ ][Set...
- Page 35 - Digital channels have a Physical, Major, and • Digital Antenna/Cable/Satellite Minor channel number. The Physical number is the actual digital channel number, the [Data 00][Data 01]: Channel Data Major is the number that the channel should Data 00 : High byte channel data be mapped to, and the Minor is the sub- Data 01 : Low byte channel data...
- Page 36 • Tune Command Examples: • Tune Command Examples: 1 Tune to the Analog cable (NTSC) channel 35. 1 Tune to the digital antenna (ISDB-T) channel 17-1. Set ID = All = 00 Data 00 = Channel Data is 35 = 23 Set ID = All = 00 Data...
- Page 37 22 Control Backlight (Command: m g) ►To control the backlight. Transmission [m][g][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 [g][ ][Set ID][ ][OK/NG][Data][x] Input select (Command: x b) (Main Picture Input) ►To select input source for main picture. Transmission [x][b][ ][Set...
Need help?
Do you have a question about the LU340L-U Series and is the answer not in the manual?
Questions and answers