Table of Contents
Advertisement
7
Brightness
(Command: k h)
►To adjust screen brightness. You can also
adjust brightness in the picture settings.
Transmission
[k][h][
][Set
ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack
[h][
][Set
ID][ ][OK/NG][Data][x]
8
Color
(Command: k i)
►To adjust the screen color. You can also
adjust colour in the picture settings.
Transmission
[k][i][
][Set
ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack
[i][
][Set
ID][ ][OK/NG][Data][x]
9
Tint
(Command: k j)
►To adjust the screen tint. You can also adjust
colour in the picture settings.
Transmission
[k][j][
][Set
ID][ ][Data][Cr]
Data Red : 00 to Green : 64
Ack
[j][
][Set
ID][ ][OK/NG][Data][x]
10
Sharpness
(Command: k k)
►To adjust the screen sharpness. You can also
adjust sharpness in the picture settings.
Transmission
[k][k][
][Set
ID][ ][Data][Cr]
Data Min : 00 to Max : 32
Ack
[k][
][Set
ID][ ][OK/NG][Data][x]
42
11
OSD
Select (Command: k l)
►To select OSD (On Screen Display) on/off
when controlling remotely.
Transmission
[k][l][
][Set
ID][ ][Data][Cr]
Data 00 :
Off
Data 01 :
On
Ack
[l][
][Set
ID][ ][OK/NG][Data][x]
12 Remote Control Lock Mode (Command:
k m)
►To lock the front panel controls on the
monitor and remote control.
Transmission
[k][m][
][Set
ID][ ][Data][Cr]
Data 00 :
Off
Data 01 :
On
Ack
[m][
][Set
ID][ ][OK/NG][Data][x]
* If you are not using the remote control, use
this mode. When main power is off & on
(plug-off and plug-in, after 20 - 30 seconds),
external control lock is released.
* In the standby mode (DC off by off timer or
'ka' , 'mc' command), and if key operation is
on, TV will not turn on by power on key of IR
& Local Key.
13
Treble
(Command: k r)
(Depending upon model)
►To adjust treble. You can also adjust Treble
in the audio settings.
Transmission
[k][r][
][Set
ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack
[r][
][Set
ID][ ][OK/NG][Data][x]
Advertisement
Table of Contents
