LG LU660H-S Series Installation Manual page 43

14 Bass
(Command: k s)
(Depending upon model)
►To adjust bass. You can also adjust Bass in
the audio settings.
Transmission
[k][s][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack
[s][ ][Set ID][ ][OK/NG][Data][x]
15 Balance
(Command: k t)
►To adjust balance. You can also adjust
balance in the audio settings.
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack
[t][ ][Set ID][ ][OK/NG][Data][x]
16 Color Temperature
►To adjust colour temperature. You can also
adjust color temperature in the picture
settings.
Transmission
[x][u][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack
[u][ ][Set ID][ ][OK/NG][Data][x]
17 Equalizer
(Command : j v)
►Adjust EQ of the set.
Transmission
[j][v][ ][Set ID][ ][Data][Cr]
MSB
0 0 0 0 0 0
Frequency Data
7 6 5 Frequency 4
0 0 0 1st Band 0
0 0 1 2nd Band 0
0 1 0 3rd Band ...
0 1 1 4th Band 1
1 0 0 5th Band 1
(Command: x u)
LSB
0 0
3 2 1 0 Step
0 0 0 0 0(decimal)
0 0 0 1 1(decimal)
... ... ... ... ...
0 0 1 1 19(decimal)
0 1 0 0 20(decimal)
Ack
[v][ ][Set ID][ ][OK/NG][Data][x]
* It depends on model, and can adjust when
sound mode is EQ adjustable value.
18 Energy Saving
(Command: j q)
(Depending upon model)
►To reduce the power consumption of the
TV. You can also adjust energy saving in
picture settings.
Transmission
[j][q][ ][Set ID][ ][Data][Cr]
Data 00 : Off
Data 01 : Minimum
Data 02 : Medium
Data 03 : Maximum
Data 04 : Auto
Data 05 : Screen off
Ack
[q][ ][Set ID][ ][OK/NG][Data][x]
19 Tune Command (Command: m a)
* This command may work differently
Depending upon model and signal.
* For Europe, Mid-East, Colombia, Asia except
South Korea and Japan Model
►Select channel to following physical
number.
Transmission
[m][a][ ][Set ID][ ][Data 00][ ][Data 01]
[ ][Data 02][Cr]
• Analog Antenna/Cable
[Data 00][Data 01] Channel Data
Data 00 : High byte channel data
Data 01 : Low byte channel data
- 00 00 ~ 00 C7 (Decimal : 0 ~ 199)
Data 02 : Input Source (Analog)
- 00 : Antenna TV (ATV)
- 80 : Cable TV (CATV)
43