Advertisement
Quick Links
MAINTENANCE
CLEANING AND CARE
1. Spot-clean the ACH Mandible with a mild detergent and water.
2. Visually check the entire ACH Mandible for signs of breakage.
ACH MANDIBLE
3. Clean dust and dirt by using air pressure.
4. Check that the ARC Rail Clip and straps work properly.
OPERATOR'S MANUAL
NOTE: IF ANY DEFECTS ARE FOUND, THE DAMAGED COMPONENTS SHOULD BE REPLACED BEFORE USE.
FOR LOW CUT ACH/ TBH HELMETS
Equipped with Ops-Core Skeleton Accessory Rail Connectors (ARCs) Only.
© OPS-CORE 2016 UM-1007 REV. A
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Ops-Core ACH
Summary of Contents for Ops-Core ACH
- Page 1 MAINTENANCE CLEANING AND CARE 1. Spot-clean the ACH Mandible with a mild detergent and water. 2. Visually check the entire ACH Mandible for signs of breakage. ACH MANDIBLE 3. Clean dust and dirt by using air pressure. 4. Check that the ARC Rail Clip and straps work properly.
- Page 2 (ACH) Mandible. The ACH Mandible provides additional face Insert both the Left and Right Mounting Hooks into the Skeleton ARC Rail Hook Receivers as shown. Once both Mounting Hooks are inserted, push down on the front of the ACH protection from blunt trauma and ballistic threats.
Need help?
Do you have a question about the ACH and is the answer not in the manual?
Questions and answers