Download
Share
Print this page
Willow Wearable Breast Pump Quick Start Manual
  1. Manuals
  2. Brands
  3. Willow Manuals
  4. Breast Pump
  5. Wearable Breast Pump
  6. Quick start manual

Willow Wearable Breast Pump Quick Start Manual

Hide thumbs Also See for Wearable Breast Pump:

Advertisement

Quick Links

Download this manual
reuse, refill, rejoice!
Willow Wearable Breast Pump Milk Container Quick Start Guide

Advertisement

loading
Need help?

Need help?

Do you have a question about the Wearable Breast Pump and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Willow Wearable Breast Pump

Summary of Contents for Willow Wearable Breast Pump

  • Page 1 Willow Wearable Breast Pump Milk Container Quick Start Guide...
  • Page 2 For complete Instructions for Use, visit willowpump.com...
  • Page 3 meet your milk container Your Milk Container comes assembled, but has two parts - the Insert and Container. Insert Container Dial Unlocked Air Vent Position Locked (underneath Dial) Position Spout Locking Ring Dial Pour Spout Tunnel Interior Valve Front Back...
  • Page 4 set dial to 1 to pump... Rotate Dial so only the 1 is visible (and the 2 is hidden under Cap). ‘1’ = Pump • Set Dial to 1 (Pump position) at the start of your session • This keeps the air vent open when you pump Rotate all the way until...
  • Page 5 ...and 2 when you’re done! Rotate Dial so only the 2 is visible (and the 1 is hidden under Cap). ‘2’ = Flip to Finish • Set Dial to 2 (Flip to Finish position) when you’re finished pumping • This closes the air vent for Flip to Finish •...
  • Page 6 sterilize for first time use 1. Disassemble Milk Container Rotate blue Push hard on Insert Separate Peel back locking ring to tunnel (use both thumbs!) Container and unlocked position until it pops out Insert 2. Boil Container and Insert for ten minutes to sterilize before you use it (just for the first time!).
  • Page 7 get ready to pump Just 4 parts - and you’re ready to pump! Insert Container Flextube™ Pump...
  • Page 8 assemble container insert & Place Insert into Press firmly to Rotate to Make sure Container (tab facing up) seal to Container locked position Cap is closed...
  • Page 9 Rotate Dial so only Push Flextube™ Connect Flextube™ tip the 1 is visible (and the collar in so it sits firmly to Insert spout. 2 is under Cap) against Cap Push tip all the way down!
  • Page 10 Turn Pump on and bring straight on to Center your nipple in Milk Container with your other hand to the Insert tunnel. connect. Press Play to initiate latch. For more on alignment, pumping, and breaking latch, visit: willowpump.com for Willow Wearable Breast Pump Instructions for Use...
  • Page 11 pumping tips (stay dry!) • The air vent (on the top of the Milk Container) is Get up open while you pump. and pump... • To prevent drips, avoid bending too far forward or back while you pump so milk doesn’t leak from the air vent.
  • Page 12 Rotate so Cap 2 (Flip to Finish position) to close remove Pump faces you air vent - or milk will leak! TIP: Rotate Dial to 2 (Flip to Finish position) before you remove Willow from your bra to avoid spills.
  • Page 13 then flip to finish TILT until pump starts to gulp HOLD until milk disappears from tunnel FLIP all the way over and wait Watch videos in app or until gulps stop (a total of 8 gulps) at willowpump.com...
  • Page 14 time to transfer Separate Milk Pour any remaining milk Flip Pump over so Container from Pump out of tunnel or Flextube™ Milk Container faces up TIP: Squeeze Flextube™ to get milk remaining out of Tunnel and Flextube™...
  • Page 15 Pour from pour spout on top - Rotate Dial to position Open Cap keep Flextube™ assembled. 1 before opening Cap TIP: To avoid splashing when opening Cap, first rotate Dial to position 1, then open Cap...
  • Page 16 ❏ Soak in warm, soapy water for a minimum of 5 minutes (use mild dishwashing soap, and agitate while they soak). ❏ Use the Large Cleaning Brush from your Willow Pump Kit to clean (wash for at least 60 seconds, minimum 30 seconds of brushing).
  • Page 17 Scrub around interior valve - don’t push a brush through it! Final step: Rinse through the valve from the Flextube™ side See any signs of milk after cleaning? Repeat the steps above.
  • Page 18 & lights Willow’s lights tell you what’s going on with your Milk Container. Here’s what they mean. White Solid: Your Container is full. Flip to Finish (see p. 10-11), transfer to a bottle or bag, then press Pump/Pause to continue pumping.
  • Page 19 1-888-WILLOW-3 care willowpump.com willowpump.com/help...
  • Page 20 ©2019 Willow. All rights reserved. Willow and Flextube are trademarks or registered trademarks of Willow in the United States and other countries.