Download Print this page

Advertisement

Quick Links

IMPORTANT: RETAIN FOR FUTURE REFERENCE, READ CAREFULLY
Safety Precautions
Read all instructions before assembly and use of the high chair. Keep instructions for future use.
WARNING
FOLLOW THE MANUFACTURERS INSTRUCTIONS
DO NOT LEAVE CHILDREN UNATTENDED
THE HARNESS MUST ALWAYS BE USED AND CORRECTLY FITTED - MOST INJURIES FROM HIGHCHAIRS
ARE CAUSED BY FALLS
POSITION THE HIGH CHAIR AWAY FROM SOLID STRUCTURES AND BENCHES TO AVOID INJURIES CAUSED
BY FALLS AND BY ACCESS TO DANGEROUS ITEMS
DO NOT USE THIS HIGH CHAIR UNTIL THE CHILD CAN SIT UP UNAIDED.
Not recommended for a child under 6 months old.
The weight of the child using this high chair should not exceed 17 kgs.
Do not use the high chair unless all components are correctly fitted and adjusted.
Always keep child in view while in high chair.
The tray is not designed to hold the child in the chair.
Always secure your child in the restraint. Ensure that your child wears a correctly fitted and adjusted harness at all times.
Only use the high chair on a secure level surface.
Do not allow children to stand on the seat or footrest or climb into or out of the high chair.
When adjusting the high chair, make sure that parts of your child's body are clear of any moving parts.
Do not carry the high chair with a child in the chair.
To reduce the risk of injury position the high chair away from furniture, walls, hot surfaces and liquids, window covering cords and electrical
cords, and position the high chair away from furniture when the chair is not being used at a table with a tray removed.
Periodically check that all parts of the high chair are in good working order.
Do not use the high chair if it is damaged or broken.
Avoid crushing the high chair when storing or loading into a car.
Promptly replace worn out or broken parts.
Assembly Contents
Seat with seat
pad and harness
Assembly / Operating Instructions
To attach leg frames
Press and hold the red button on both of the leg frames and extend the leg.
Push the spring pin on the bottom of the leg, and insert the right leg frame into the adjusting bracket on the right side of the
seat. Repeat this step for the left leg frame. Ensure the height of both legs is the same.
Tray
Bottom frames
x 2
High Chair Model # 044213
Side frames (left
and right)
VISTA
Footrest
Short screws,
Long screws,
Stop washers
x 2

Advertisement

loading

Summary of Contents for Childcare VISTA

  • Page 1 VISTA High Chair Model # 044213 IMPORTANT: RETAIN FOR FUTURE REFERENCE, READ CAREFULLY Safety Precautions Read all instructions before assembly and use of the high chair. Keep instructions for future use. WARNING FOLLOW THE MANUFACTURERS INSTRUCTIONS DO NOT LEAVE CHILDREN UNATTENDED...
  • Page 2 Lower the seat height to its lowest position. Press the red button on both of the leg frames as shown and bring front and rear frames together. How to care for your Childcare High Chair Cleaning To ensure the long-lasting use of your high chair, wipe down with a damp cloth and use a mild soap solution if necessary. Do not use abrasive cleaners. Always store product in a clean dry place.

This manual is also suitable for:

044213