Table of Contents
Advertisement
Quick Links
Schematic Plan for DP-8800plus/DP-8600 Part Installation
7
6
8
9
Figure 1 Schematic Plan of Part Installation (with 14" monitor)
5
4
Figure 2 14" Monitor Assembly
1. transducer holder C
2. transducer holder D
3. ultrasound gel holder
4. hexagon socket screw
M5×35/spring washer Φ5/plain
5. pushing handle
6. limit screw M5×16/spring washer
Φ5
7. transducer cable hook
8. screw M4×8
9. rear cover of monitor
10. screw M4×8
11. monitor assembly
12. neck cover
13. main unit
1. limit screw
2. cable strap
3. screw M4×8
4. rear cover of monitor
3
5. power cable
6. signal cable
7. monitor
2
8. friction pad
9. neck cover
1
1
Advertisement
Table of Contents
Related Manuals for Mindray DP-8800plus
Summary of Contents for Mindray DP-8800plus
- Page 1 Schematic Plan for DP-8800plus/DP-8600 Part Installation 1. transducer holder C 2. transducer holder D 3. ultrasound gel holder 4. hexagon socket screw M5×35/spring washer Φ5/plain 5. pushing handle 6. limit screw M5×16/spring washer Φ5 7. transducer cable hook 8. screw M4×8 9.
- Page 2 Operating procedures are shown as follows: I. Installing the monitor 1. As shown in the figure, prior to installation of the monitor, place the neck cover on the neck of the main unit, and place the friction pad on the rotating axis. 2.
- Page 3 Schematic Plan for DP-9900plus/DP-9900/DP-9600 Part Installation 1. main unit 2. transducer holder B 3. ultrasound gel holder 4. neck cover washer Φ5 5. monitor assembly 6. screw M4x8 7. rear cover of monitor 8. screw M4×8 9. transducer cable hook 10.
- Page 4 II. Installing the pushing handle Take out the pushing handle and three sets of hexagon socket screws M5x35/spring washers Φ5/plain washers Φ5, and then use the M5 hexagon socket wrench to fix the pushing handle in position. III. Installing transducer cable hook and holder Take out the transducer cable hook and holder, and place them in position.
Need help?
Do you have a question about the DP-8800plus and is the answer not in the manual?
Questions and answers