Table of Contents
Advertisement
Operating the Unit
1. When you have made the necessary connections
(p. 6–p. 11), set the knobs as shown in the
illustration.
2. Depress the pedal switch to turn the effect on.
(Make sure that the CHECK indicator lights.)
12
7
6
5
3. Select the mode with the MODE knob.
4. Adjust the harmonic content with the TOP knob.
* If the sound is distorted, adjust by turning the TOP knob to
the left (counterclockwise).
* Distortion can also be suppressed by turning the LEVEL knob
to the left.
5. Adjust the breadth of the sound with the BODY knob.
6. Using the LEVEL knob, adjust the balance of the
volume for when the effects are on and when off.
7. Adjust the amount of reverb with the REVERB knob.
4
3
Advertisement
Table of Contents
