M.2 Solid-State Drive - HP ProOne 600 G4 Maintenance & Service Manual

M.2 solid-state drive

For a list of available solid-state drives, see
To remove the M.2 solid-state drive:
1. Prepare the computer for disassembly (see
2. Remove the stand (see
3. Remove the rear port cover (see
4. Remove the Phillips screw (1) that secures the drive to the computer.
5. Pull the drive away to remove it from the socket (2).
To install the solid-state drive, reverse the removal procedures.
Mass storage devices on page
Preparing to disassemble the computer on page
Stand on page 19).
Rear port cover on page
9.
24).
M.2 solid-state drive
19).
29