Subscribe to Our Youtube Channel
Related Manuals for Gardener's 8608959
Summary of Contents for Gardener's 8608959
- Page 1 1-800-876-5520 • gardeners.com info@gardeners.com 1. Press a cap (H) into the top of each leg (B) using a mallet if necessary. The top side of each leg (B) has holes as shown to the right:...
- Page 2 2. Lay two long boards (A) on a flat surface and align the ends. 3. Slide an aluminum leg (B) over each end - orient as shown below (flanges facing up): 4. Ensure the leg (B) is tight against the board (A) ends. Slide the wood until it is even with black cap (flush) and install ONLY 4 screws (G) as shown to the right: 5.
- Page 3 8. Secure both flat stock (D) to the boards (A) with a screw (G) in each of the 4 holes. 9. Repeat steps 2-8 for the second long panel. 10. Slide an end panel (C) into the leg (B) and align the top boards. The pre-attached cross support (C) sits below the platform support (F) as shown below.
- Page 4 13. Place the remaining long panel atop the end panels (C) aligning the boards with the channel in the legs (B) 14. Repeat step 11 to secure the second long panel to the planter box. 15. With two people, carefully rotate the planter upright and install a screw (G) in each corner as shown in step 10.
Need help?
Do you have a question about the 8608959 and is the answer not in the manual?
Questions and answers