Download Print this page

Electrical Connections - XICOY LGC 13C User Manual

Electric landing gear controller and sequencer

Advertisement

Congratulations on the purchase of your new landing gear controller. Xicoy are
dedicated to the design and production of electronic controllers to the highest
standards of quality and reliability to bring you the customer the very latest next
generation designs.
Features:
-Direct control of 3 motors in bidirectional and regulated mode up to 2,5A
-Control of electric brake, full proportional, lineal and adjustable pulsed mode.
-3 servo outputs for the control of the doors, endpoints programmable
-Steering servo processor. Programmable position of servo arm in retracted mode,
programmable center, sense of movement and gain on extended position.
-Single or dual channel mode.
-Programmable delay for extension and retraction of all gears independently.
-Easy programming trough a LCD display.
-Small size and lightweight.
Installation:
Thanks the small size and lightweight of the unit, it can be placed in any place on the
model. We recommend a place where the wiring to the gears be the shorter as
possible to have a clean installation.

Electrical connections:

Motor connections:
Connect the 3 motor leads to the sockets in the unit. Please note that are
labeled "Nose gear", "Left Gear", "Right Gear". Assure you connect the correct gear
Welcome!

Advertisement

loading