Data Calibration - Ursalink AM100 Series User Manual

AM100 Series User Guide
Ursalink ToolBox (APP): Device → Settings → Data Collection Settings
Note: The data displayed on the screen is the current value.
The data reported to the gateway is the average of the reporting interval.

7.2.2 Data Calibration

Location:
Ursalink ToolBox (PC): Device Settings → Data Calibration Settings
Ursalink ToolBox (APP): Device → Settings → Data Calibration Settings
Data Calibration Settings
Item
Enable
Current Raw Value
Calibration Value
Calibration button
Final Value
Temperature Calibration
Description
Enable calibration.
The current value.
The error value used for calibration.
Range: -65535 to +65535
Click to reset value to 0.
Adjusted value.
Enter the calibration value for temperature.
Note: only one decimal is allowed.
Default
Disable
Null
Null
Null
Null
Null
26