Ursalink AM100 Series User Manual page 2

AM100 Series User Guide
Safety Precautions
Ursalink will not shoulder responsibility for any loss or damage resulting from not following
the instructions of this operating guide.
 The device must not be disassembled or remodeled in any way.
 Do not place the device outdoors where the temperature is below/above operating
range. Do not place the device close to objects with naked flames, heat source (oven or
sunlight), cold source, liquid and extreme temperature changes.
 The device is not intended to be used as a reference sensor, and Ursalink will not should
responsibility for any damage which may result from inaccurate readings.
 The battery should be removed from the device if it is not to be used for an extended
period. Otherwise, the battery might leak and damage the device. Never leave a
discharged battery in the battery compartment.
 The device must never be subjected to shocks or impacts.
 Do not clean the device with detergents or solvents such as benzene or alcohol. To clean
the device, wipe with a soft moistened cloth. Use another soft, dry cloth to wipe dry.
Declaration of Conformity
Ursalink AM100 series is in conformity with the essential requirements and other relevant
provisions of the CE, FCC, and RoHS.
© 2017-2020 Xiamen Ursalink Technology Co., Ltd.
All rights reserved.
All information in this guide is protected by copyright law. Whereby, no organization or individual
shall copy or reproduce the whole or part of this user guide by any means without written
authorization from Xiamen Ursalink Technology Co., Ltd.
Revision History
Date Doc Version
April 7, 2020 V 1.0
May 19, 2020 V 1.1
For assistance, please contact
Ursalink technical support:
Email: helpdesk@ursalink.com
Tel: 86-592-5023060
Fax: 86-592-5023065
Description
Initial version
APP pictures replacement
2