Silvercrest SLM 5 A1 Quick Start Manual page 130

Start playback on the Bluetooth
♦
♦ Press and hold the
speaker off and deactivate the Bluetooth
hear a descending series of beeps.
The operating/charging LED
simultaneously and then goes out.
To connect further Bluetooth
♦ Switch on the speaker and press the button
speaker is in pairing mode and can be connected to another
Bluetooth device.
NOTE
► If you do not establish a connection between the speaker and
your Bluetooth
switch off automatically. In this case, you will have to switch the
speaker back on before restarting the pairing process.
If the speaker stops receiving a signal while in Bluetooth
►
mode, the speaker will switch off automatically after around
10 minutes.
SLM 5 A1
button for about 3 seconds to turn the
flashes blue and orange twice
®
devices, proceed as follows:
®
device within 3 minutes, the speaker will
®
device.
®
function. You will
. Now, the
GB │ MT
®
│
119 ■