Battery Replacement; Maintenance - Surefire UDR DOMINATOR User Manual

NOTE: If flashlight is left to charge for too long, fuel gauge LED will flash yellow and then red, indicating the battery has drained to a reduced
capacity. Should this occur, disconnect and then reconnect the charger plug from flashlight and restart charging procedure to obtain maximum
battery capacity.
If the battery is very hot, or severely depleted, the fuel gauge LED may indicate that the battery is fully charged (solid green) or rapidly blinking green
for several seconds while the battery pack cools and resets. Normal charging begins after the fuel gauge resets to solid yellow or solid red to reflect
the actual charge remaining.
WARNING: Do not attempt to charge rechargeable (or disposable) 123A batteries in the flashlight. Optional rechargeable lithium-phosphate 123A
cells, such as those sold by SureFire, should be recharged only in a separate charger included with their own kit.

BATTERY REPLACEMENT

The UDR Dominator is a dual-fuel-capable flashlight that can be powered by either its included lithium-ion rechargeable
®
battery or 12 disposable lithium 123A batteries loaded into its supplied battery magazine. The lithium-ion rechargeable battery
does NOT need to be removed from the flashlight to be charged and should only be removed when replacing it with a new
lithium-ion rechargeable battery or its battery magazine fully loaded with disposable 123A lithium batteries.
To load battery magazine:
Insert 12 new SureFire 123A lithium batteries into supplied battery magazine with their positive terminals facing forward,
toward the gold-contact end of the battery magazine.
To remove li-ion battery or battery magazine:
1. Unscrew and remove tailcap cover.
2. Tilt tailcap end of light down and slide lithium-ion or
battery magazine into your free hand.
USER MANUAL
6
GOLD-CONTACT
END
To insert batteries:
1. Insert lithium-ion battery or fully loaded 123A battery magazine into flashlight body with the gold-contact
end facing forward toward head.
2. Screw tailcap back on securely.
3. When switching between lithium-ion and
disposable lithium 123A batteries, activate
light briefly with head switches to reset
microprocessor and test functioning.
BATTERY INFORMATION & WARNINGS
Before replacing batteries, read the enclosed BATTERY INFORMATION/WARNING insert in your original packaging.
For additional battery safety, handling, and product information, visit www.surefire.com/batteries.

MAINTENANCE

Use a clean, dry cloth to wipe off body and window. Periodically clean and lubricate threads and O-rings using a thin
coat of non-migrating, silicon-based lubricants. Avoid using petroleum-based lubricants that can damage O-rings.
For additional tips on maintaining your SureFire illumination tool, visit www.surefire.com/faqs-maintenance.
ACCESSORIES
For a complete listing of accessories, visit www.surefire.com/partsaccessories.
WWW.SUREFIRE.COM
TEST WITH HEAD SWITCHES TAILCAP
BATTERY MAGAZINE WITH 12 LITHIUM-ION BATTERY
SF 123A BATTERIES
7