Intercom; Address Settings - BAS-IP AK-10 Manual

Intercom

Address settings

Building:

building number
0001-9999
Unit:

Unit number
00-99
Floor:

Floor number
00-99
Room:

Room number
01-99
Device number: The sequence number of the monitor in the system.

If the monitor is one, it is necessary to set "0" in this line. If there are several monitors, then the
numbering should begin with "0" and end with "8".
Sync code: Synchronization code between monitors and panels for an intercom.
MS IP address: The address of the PC or server where the monitoring software for the intercom
system is installed: Management Software or Link.
Configuration through web interface – 63