Dtmf; Default Panel View Mode - BAS-IP AK-10 Manual

Password: Password of SIP number.

DTMF

Lock Name #1: The name displayed near the first lock button.
Default value: Enable/disable the function to send a standard value when the button to open the
first lock is pressed (the internal protocol command to open the door).
Lock code #1: DTMF code transmitted when the first lock button is pressed.

By default panels are set to open the door when there is "#" DTMF code recieved to
open first lock.
Second lock: Turn on/off the button of the second lock, for example when using the SH-42
module or the AV-07T panel.
Lock Name #2: The name displayed near the second lock button.
Lock code #2: DTMF code transmitted when the second lock button is pressed.

By default panels are set to open the door when there is "0" DTMF code recieved to
open second lock.

Default panel view mode

Configuration through graphical interface – 44