Download Print this page

Frymaster NAVY SUBMARINE Installation, Operation, Service, And Parts Manual page 2

Advertisement

IF, DURING THE WARRANTY PERIOD, THE CUSTOMER USES A PART FOR THIS MANITOWOC
FOOD SERVICE EQUIPMENT OTHER THAN AN UNMODIFIED NEW OR RECYCLED PART
PURCHASED DIRECTLY FROM FRYMASTER/DEAN, OR ANY OF ITS AUTHORIZED SERVICERS,
AND/OR THE PART BEING USED IS MODIFIED FROM ITS ORIGINAL CONFIGURATION, THIS
WARRANTY WILL BE VOID. FURTHER, FRYMASTER/DEAN AND ITS AFFILIATES WILL NOT BE
LIABLE FOR ANY CLAIMS, DAMAGES OR EXPENSES INCURRED BY THE CUSTOMER WHICH
ARISE DIRECTLY OR INDIRECTLY, IN WHOLE OR IN PART, DUE TO THE INSTALLATION OF
ANY MODIFIED PART AND/OR PART RECEIVED FROM AN UNAUTHORIZED SERVICER.
Copper wire suitable for at least 167°F (75°C) must be used for power connections.
The electrical power supply for this appliance must be the same as indicated on the
rating and serial number plate located on the inside of the fryer door.
This appliance must be connected to the voltage and phase as specified on the rating
and serial number plate located on the inside of the fryer door.
All wiring connections for this appliance must be made in accordance with the wiring
diagrams furnished with the equipment. Wiring diagrams are located on the inside of
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this
the fryer door.
or any other appliance.
Do not use water jets to clean this equipment.
NOTICE
DANGER
DANGER
DANGER
DANGER
DANGER
WARNING

Advertisement

loading

This manual is also suitable for:

H14