Page 1
USER MANUAL MANUALE D’USO DP 1420EN ALUMINIUM SOUND PROJECTOR IN COMPLIANCE WITH EN 54-24 STANDARD PROIETTORE DI SUONO IN ALLUMINIO CONFORME ALLA NORMA EN 54-24...
TABLE OF CONTENTS INDICE ENGLISH SAFETY PRECAUTIONS DESCRIPTION INSTALLATION CONNECTION NOTES ABOUT CONSTANT VOLTAGE SYSTEMS SPECIFICATIONS ITALIANO AVVERTENZE PER LA SICUREZZA E PRECAUZIONI D’USO DESCRIZIONE INSTALLAZIONE COLLEGAMENTO NOTE SUI SISTEMI A TENSIONE COSTANTE DATI TECNICI...
RCF S.p.A. will not assume any responsibility for the incorrect installation and / or use of this product. SAFETY PRECAUTIONS 1.
Page 4
9. RCF S.p.A. strongly recommends this product is only installed by professional qualified installers (or specialised firms) who can ensure a correct installation and certify it according to the regulations in force. The entire audio system must comply with the current standards and regulations regarding electrical systems.
RCF S.P.A. THANKS YOU FOR PURCHASING THIS PRODUCT, WHICH HAS BEEN DESIGNED TO GUARANTEE RELIABILITY AND HIGH PERFORMANCE. DESCRIPTION DP 1420EN is an aluminium sound projector in compliance with EN 54-24 standard. Main features: - 130 mm (5”) loudspeaker - Cylindrical extremely sturdy body in extruded aluminium...
INSTALLATION WARNING: Make sure that the loudspeaker is installed in a stable and secure way in order to avoid any conditions that may be dangerous for persons or structures. Ensure the support surface (walls, ceilings, etc.) has the necessary mechanical characteristics to support the weight of the loudspeaker.
CONNECTION WARNING: loudspeaker connections should be only made by qualified and experienced personnel having the technical know-how or sufficient specific instructions to ensure that connections are made correctly and to prevent any electrical danger. To prevent any risk of electric shock, do not connect loudspeakers when the amplifier is switched on.
Page 8
LINE TRANSFORMER CONNECTION The loudspeaker line transformer is connected to the terminal strips through the two conductors with FASTON connectors. Connect the FASTON connector marked TAP (red wire) to the terminal of the line transformer marked with the desired power. POWER POWER (100 V)
NOTES ABOUT CONSTANT VOLTAGE SYSTEMS - The loudspeaker input voltage (Vd) shall correspond to the amplifier output voltage (Va). - The sum of nominal power values (Pd x n) of all loudspeakers connected to the line shall not exceed the amplifier power (Pa). - Make sure all loudspeakers are connected in phase to ensure a correct sound reproduction.
SPECIFICATIONS INPUT VOLTAGE: 100 V – 70 V POWER (SELECTABLE): 20 W – 10 W – 5 W – 2.5 W (100 V) 20 W – 10 W – 5 W – 2.5 W – 1.25 W (70 V) INPUT IMPEDANCE: 250 Ω...
L’installazione e l’utilizzo errati del prodotto esimono la RCF S.p.A. da ogni responsabilità. AVVERTENZE PER LA SICUREZZA E PRECAUZIONI D’USO 1.
Page 12
9. La RCF S.p.A. raccomanda vivamente che l’installazione di questo prodotto sia eseguita solamente da installatori professionali qualificati (oppure da ditte specializzate) in grado di farla correttamente e certificarla in accordo con le normative vigenti. Tutto il sistema audio dovrà essere in conformità con le norme e le leggi vigenti in materia di impianti elettrici.
RCF S.P.A. VI RINGRAZIA PER L'ACQUISTO DI QUESTO PRODOTTO, REALIZZATO IN MODO DA GARANTIRNE L'AFFIDABILITÀ E PRESTAZIONI ELEVATE. DESCRIZIONE DP 1420EN è un proiettore di suono in alluminio conforme alla norma EN 54-24. Presenta le seguenti caratteristiche: - altoparlante avente un diametro di 130 mm;...
INSTALLAZIONE NOTA: Installare il diffusore in modo stabile e sicuro, così da evitare qualsiasi condizione di pericolo per l’incolumità di persone o strutture. Controllare che la struttura di supporto (es. la parete, il soffitto, ecc.) abbia le necessarie caratteristiche meccaniche, tali da consentirgli di sopportare il peso del diffusore senza il pericolo di cadute.
COLLEGAMENTO ATTENZIONE: per il collegamento del diffusore si raccomanda di rivolgersi a personale qualificato ed addestrato, ossia personale avente conoscenze tecniche o esperienza o istruzioni specifiche sufficienti per permettergli di realizzare correttamente le connessioni e prevenire i pericoli dell’elettricità. Per evitare il rischio di shock elettrici, non collegare il diffusore con l’amplificatore acceso.
Page 16
COLLEGAMENTO DEL TRASFORMATORE DI LINEA Il trasformatore di linea del diffusore è collegato alle morsettiere ceramiche tramite i 2 conduttori intestati con connettori FASTON. Collegare il connettore FASTON contrassegnato con TAP (filo rosso) al contatto del trasformatore di linea indicante la potenza desiderata. POTENZA POTENZA (contatti)
NOTE SUI SISTEMI A TENSIONE COSTANTE - La tensione d’ingresso del diffusore (Vd) deve corrispondere con la tensione d’uscita dell’amplificatore (Va). - La somma delle potenze nominali di tutti i diffusori (Pd x n) collegati alla linea non deve superare quella dell’amplificatore (Pa). - Per garantire una corretta riproduzione audio, effettuare il collegamento di tutti i diffusori “in fase”.
Page 18
DATI TECNICI TENSIONE D’INGRESSO: 100 V – 70 V POTENZA (SELEZIONABILE): 20 W – 10 W – 5 W – 2,5 W (100 V) 20 W – 10 W – 5 W – 2,5 W – 1,25 W (70 V) IMPEDENZA D’INGRESSO: 250 Ω...
Page 19
1488 RCF S.p.A. - Via Raffaello Sanzio 13, 42124 Reggio Emilia, ITALY 1488-CPR-0485/W EN 54-24:2008 Loudspeaker for voice alarm systems for fire detection and fire alarm systems for buildings DP 1420EN Type B DoP: 009_14 Other technical data: see operational manual.
Page 20
Salvo eventuali errori ed omissioni. Except possible errors and omissions. RCF S.p.A. reserves the right to make modifications without prior notice. www.rcf.it RCF S.p.A. Italy Via Raffaello Sanzio, 13 42124 Reggio Emilia - Italy Tel +39 0522 274 411 Fax +39 0522 232 428...
Need help?
Do you have a question about the DP 1420EN and is the answer not in the manual?
Questions and answers