Cisco Aironet 1570 Series Mounting page 23

Chapter 3 Mounting the Access Point
Figure 3-15 AP1572E Vertically Mounted on Vertical Pole with PMK1
1 Stainless steel band straps
3 Vertical pole
Pole Mount Kit 2
The Pole Mount Kit 2 (abbreviated as PMK2) can be used to vertically mount the AP on a vertical pole,
a horizontal pole, or on an off-angle pole. Poles of diameter ranging from 2 to 16 inches are supported.
This kit can also be used to vertically mount the AP on a wall.
The PMK2 consists of these parts:
•
•
•
•
The Pivot Bracket and the Strap Brackets, are used only when mounting the AP on poles.
By itself, the Wall Mount Bracket, is used for vertical mounting on the AP on walls. For more
information, see
Mount Bracket is used along with the Pivot Bracket and the Strap Brackets.
OL-32138-01
2
2
A wall mount bracket, for vertical mounting on walls (see
A pivot bracket (see Figure
Two strap brackets (see Figure
Two adjustable steel band straps
Wall Mounting Using PMK2, page
1
4
3
2 M8 x 12mm hex head bolt
4 PMK1
3-18)
3-19)
3-40. When mounting the AP on poles, the Wall
Cisco Aironet 1570 Series Outdoor Access Point Hardware Installation Guide
Pole Mount Kit 2
Figure 3-17)
3-23