Cisco Aironet 1570 Series Mounting page 17

Chapter 3 Mounting the Access Point
Figure 3-11
1
4
OL-32138-01
Cable Brackets Attached to Back Surface of Access Point
5
4
Height-adjustable cable brackets.
M8x16 mm button-head bolts in
elongated holes for tilt adjustment.
These fasten the cable bracket assembly
to the AP.
Cisco Aironet 1570 Series Outdoor Access Point Hardware Installation Guide
1
3
2 5/16"-18 bolts and holes used for adjusting
and the height of the cable brackets.
3
5 5/16"-18 bolt, flange washer, and cable
clamps on the cable bracket.
Strand Mount Kit 3
2
3-17