Unpacking the Access Point
Unpacking the Access Point
To unpack the access point, follow these steps:
Step 1
Open the shipping container and carefully remove the contents.
Step 2
Return all packing materials to the shipping container, and save it.
Step 3
Ensure that all items listed in the following sections are included in the shipment. If any item is damaged
or missing, notify your authorized Cisco sales representative.
AP1572IC Package Contents
•
•
•
•
AP1572EC Package Contents
•
•
•
•
•
•
•
AP1572EAC Package Contents
•
•
•
•
•
•
Cisco Aironet 1570 Series Outdoor Access Point Hardware Installation Guide
3-2
One AP1572IC series access point
Grounding Lug kit containing #6 AWG grounding wire with grounding lug (having two holes), and
two M4.0 x 10mm screws
Oxide inhibitor paste
Cisco product documentation pointer card
One AP1572EC series access point
Grounding Lug kit containing #6 AWG grounding wire with grounding lug (having two holes), and
two M4.0 x 10mm screws
Two M5.0 x 10mm screws
Four 10 inch environmental seal tape
Oxide inhibitor paste
One PG13.5 cable gland
Cisco product documentation pointer card
One AP1572EAC series access point
Grounding Lug kit containing #6 AWG grounding wire with grounding lug (having two holes), and
two M4.0 x 10mm screws
Four 10 inch environmental seal tape
Oxide inhibitor paste
Two PG13.5 cable glands
DC Connector (Cisco Part Number 29-100226-01)
Chapter 3
Mounting the Access Point
OL-32138-01