Caution: Please read this manual carefully before operating Damage caused by misuse is not covered by the warranty Introduction Thank you for choosing CAB series active speakers with Bluetooth link for your sound system. These cabinets provide versatile, high quality sound reinforcement with true wireless function. Please read this manual prior to use to avoid damage through misuse.
Page 3
Rear panel Bluetooth pairing button Mic/Line input 1 level Bluetooth volume Input 1 Mic/Line level switch Input 1 Mic input XLR Input 1 Line input 6.3mm jack Mains IEC inlet + fuse holder Line input 2 level High EQ boost/cut control Low EQ boost/cut control Master output and status LEDs Line output XLR...
Connections If a microphone is to be used directly with the CAB speaker, connect via the Mic Input 1 XLR (5) and select MIC on the mic/line level sector switch (4). Alternatively, a line input (e.g. CD, mp3 player or laptop) can be connected to the Input 1 jack socket (6) and the mic/line selector switch set to LINE.
EQ controls For all inputs to the CAB speaker, there are global High and Low EQ controls (9, 10) High EQ adjusts the high frequency content of the output (otherwise called “treble”) This affects the detail and intelligibility of the tone. Low EQ adjusts the low frequency content of the output (otherwise called “bass”) This affects the warmth and depth of the tone.
Bluetooth Link A key feature of the CAB-10/12/15L cabinets is the Bluetooth link function, which enables 2 cabinets to pair to each other wirelessly for stereo Bluetooth playback. To pair 2 CAB speakers, power both up into pairing mode within wireless range of each other and pairing should be automatic when they detect each other (unless one or both cabinets are already paired to others, in which case, reset Bluetooth pairing by holding down the pairing button for 3 seconds)
Need help?
Do you have a question about the Citronic CAB Series and is the answer not in the manual?
Questions and answers