Advertisement
After you have removed the LED
cover. Look carefully at the LED strip.
You should see an area at one end
where the LED strip seperates. At that
end, slide the LED strip out, so that
small strip is removed from the hous-
ing. It is still connected to the other
strip, so do not try to fully remove it.
After this strip is out of the housing.
Slide the larger LED strip back the
opposite way.
Once the bracket end caps have
been removed, slide out the plastic
LED cover.
Slide the strip until the full battery
housing is shown. This is as far as
you need to slide the LED strip. Slid-
ing it any farther could seperate wires
and cause damage.
Advertisement
