Firmware Upgrade Menu; Other Menu Choices - Tripp Lite SmartOnline 3-Phase UPS Systems SU20KX Owner's Manual

10 – Display and Confi guration

10-16 Firmware Upgrade Menu

Warning: The firmware should be upgraded by qualified service personnel only. Use only firmware that has been approved by Tripp Lite.
Failure to comply will void the warranty.
• Enter the maintenance menu as described in
1
the scroll buttons ( , ) to move the cursor to "FIRMWARE
UPGRADE", then press the enter button (
• Use the scroll buttons (
2
select one of the menu choices. You must enter the administrator
password to confirm the operation.
Note: Press the "ESC" button to return to the previous menu.

10-17 Other Menu Choices

• 1 Enter the maintenance menu as described in
the scroll buttons ( , ) to move the cursor to "OTHERS", then
press the enter button (
• 2 Use the scroll buttons (
a menu choice. "SN & FW VERSION" shows the serial number
and firmware version of the UPS system. "SYSTEM TIME" shows
the UPS system's current date and time. "MODULE DC BUS
VOLT" shows the current voltage of the DC bus. Qualified service
personnel may wish to view this information when performing
maintenance or repair on the UPS system.
Note: Press the "ESC" button to return to the previous menu.
200706017 93-2688 SU manual 4C.indd 45 200706017 93-2688 SU manual 4C.indd 45
Section 10-12. Use
).
, ) and the enter button ( ) to
Section 10-12. Use
).
, ) and the enter button ( ) to select
(continued)
1
2
1
2
45
1
2
3
4
5
6
7
8
9
10
11
12
13
14
11/29/2007 2:03:02 PM 11/29/2007 2:03:02 PM