Asus M2N68 Manual page 69

Memory Configuration
Memory Configuration
Bank Interleaving
Channel Interleaving
Enable Clock to ALL DIMMs [Disabled]
MemCLK Tristate C3/ATLVID [Disabled]
Memory Hole Remapping
DCT Unganged Mode
Power Down Mode
Bank Interleaving [Disabled]
Allows you to enable or disable the Bank Memory Interleaving.
Configuration options: [Disabled] [Auto]
Channel Interleaving [Disabled]
Allows you to enable the channel memory interleaving.
Configuration options: [Disabled] [Address bits 6] [Address bits 12] [XOR of
Address bits [20:16,6]] [XOR of Address bits [20:16,9]]
Enable Clock to All DIMMs [Disabled]
Allows you to enable or disable the Unused Clocks to DIMMs Even Memory
Slots are not populated. Configuration options: [Disabled] [Enabled]
MemCLK Tristate C3/ATLVID [Disabled]
Allows you to enable or disable the MemCLK Tri-Stating during C3 and Alt VID.
Configuration options: [Disabled] [Enabled]
Memory Hole Remapping [Enabled]
Allows you to enable or disable the Memory Remapping Around Memory
Hole.Configuration options: [Disabled] [Enabled]
DCT Unganged Mode [Auto]
Allows you to enable or disable Unganged mode. Configuration options:
[Auto] [Always]
Power Down Enable [Enabled]
Allows you to enable or disable DDR power down mode.
Configuration options: [Enabled] [Disabled]
ASUS M2N68
[Disabled]
[Auto]
[Enabled]
[Auto]
[Enabled]
Enable Bank Memory
Interleaving
2-25