Internal Connectors - Asus M2N68 Manual

1.10.2

Internal connectors

1. Floppy disk drive connector (34-1 pin FLOPPY)
This connector is for the provided Floppy Disk Drive (FDD) signal cable.
Insert one end of the cable to this connector, then connect the other end to
the signal connector at the back of the floppy disk drive.
Pin 5 on the connector is removed to prevent incorrect cable connection when
using an FDD cable with a covered Pin 5.
M2N68 Floppy Disk Drive Connector
1-24
M2N68
FLOPPY
NOTE: Orient the red markings on
the floppy ribbon cable to PIN 1.
Chapter 1: Product introduction