Specifications - Tripp Lite PowerVerter Plus DC-to-AC Inverter Owner's Manual

Specifications

MODEL NUMBER:
DC Input Volts (Nominal):
DC Input Voltage Range:
DC Input Connection:
Output Volts (Nominal):
Output Frequency (Nominal):
Output Waveform:
Efficiency:
Continuous Power (@ 20 C):
OverPower™ Peak Surge Power:*
Double Boost™ Peak Surge Power:*
DC Fuse Rating (UL Recognized):
* OverPower duration (up to 1 hour). DoubleBoost duration (up to 10 seconds). Actual duration depends on battery age, battery charge level and ambient temperature.The policy of Tripp Lite is one of continuous
improvement. Specifications are subject to change without notice.
This product designed and engineered in the USA.
Regulatory Compliance Identification Numbers
For the purpose of regulatory compliance certifications and identification, your Tripp Lite product has been assigned a unique series number. The series number can be found on the product
nameplate label, along with all required approval markings and information. When requesting compliance information for this product, always refer to the series number. The series number
should not be confused with the marking name or model number of the product.
Tripp Lite Inverters include a Battery Charge Conserver (Load Sense) Control which saves battery power by allowing users to
set the minimum load level at which the unit's inverter turns on. Users can significantly reduce the No Load DC Input Current to
a very low amperage power level with the use of this control.
PV750UL
12 VDC
10 - 15 VDC
User-Supplied Cables
120 VAC, ± 5%
60 Hz, ± 0.5%
Modified Sine Wave
Up to 94%, depending on load Up to 94%, depending on load
and temperature
750 W
1125 W
1500 W
200 Amp
Minimum Recommended Cable Sizing Chart
Always loosely twist each pair of cables together before connecting them separately to
the appropriate DC terminal on the Inverter (positive or negative). Use in conjunction
with DC wiring connection instructions in the Battery Connection section.
Watts 6
500 15 ft
700 11 ft
1000 N/R
2000 N/R
2400 N/R
† N/R = Not Recommended. NOTE: Acceptable power is directly related to cable length (i.e. - the shorter the cable,
the better the performance)
1111 W. 35th Street • Chicago, IL 60609 USA
Customer Support: 773.869.1234 • www.tripplite.com
PV750FC
12 VDC
10 - 15 VDC
User-Supplied Cables User-Supplied Cables
120 VAC, ± 5%
60 Hz, ± 0.5%
Modified Sine Wave
Up to 94%, depending on load
and temperature
750 W
1125 W
1500 W
200 Amp
Wire Gauge
2 Conductors
4 2 0
25 ft 39 ft 62 ft
18 ft 28 ft 44 ft
12 ft 20 ft 31 ft
N/R N/R 16 ft
N/R N/R 13 ft
PV1250UL
12 VDC
10 - 15 VDC
User-Supplied Cables
120 VAC, ± 5%
60 Hz, ± 0.5%
Modified Sine Wave Modified Sine Wave
Up to 94%, depending on load
and temperature
1250 W
1875 W
2500 W
200 Amp
†
00
79 ft
56 ft
39 ft
* Only applies to models with "UL" in
20 ft
their model numbers.
16 ft
PV1250FC
12 VDC
10 - 15 VDC
120 VAC, ± 5%
60 Hz, ± 0.5%
and temperature
1250 W
1875 W
2500 W
200 Amp
200501167 93-2427