Service And Maintenance; Specifications - Tripp Lite APSWX Series Owner's Manual

7. Service and Maintenance

Service
Your Tripp Lite product is covered by the warranty described in this manual. A variety of Extended Warranty and On-
Site Service Programs are also available from Tripp Lite. For more information on service, visit tripplite.com/support.
Before returning your product for service, follow these steps:
1. Review the installation and operation procedures in this manual to ensure that the service problem does not
originate from a misreading of the instructions.
2. If the problem continues, do not contact or return the product to the dealer. Instead, visit tripplite.com/support.
3. If the problem requires service, visit tripplite.com/support and click the Product Returns link. From here you
can request a Returned Material Authorization (RMA) number, which is required for service. This simple on-
line form will ask for your unit's model and serial numbers, along with other general purchaser information. The
RMA number, along with shipping instructions will be emailed to you. Any damages (direct, indirect, special or
consequential) to the product incurred during shipment to Tripp Lite or an authorized Tripp Lite service center are
not covered under warranty. Products shipped to Tripp Lite or an authorized Tripp Lite service center must have
transportation charges prepaid. Mark the RMA number on the outside of the package. If the product is within its
warranty period, enclose a copy of your sales receipt. Return the product for service using an insured carrier to
the address given to you when you request the RMA.
Maintenance
Your Inverter/Charger requires no maintenance and contains no user-serviceable or replaceable parts, but should be
kept dry at all times. Periodically check, clean and tighten all cable connections as necessary, both at the unit and at
the battery.

8. Specifications

Model
Capacity
Nominal DC Voltage
Output Voltage Range
Peak Efficiency
Overload Protection (Inverter Mode)
Transfer Time
Cold Start Voltage
Low Voltage Alarm
Low Voltage Alarm Recovery
Low Voltage Cutoff
Dimensions (W x H x D)
Net Weight
Shipping Weight
Operating temperature
Humidity
Storage Temperature
Suitable for Pollution Level
Altitude
APSWX2K24VMPPT
2kVA/2kW
230V AC±10%
110%-125% for 15 minutes
125%-150% for 60 seconds
>150% for 20 seconds
10ms typical (UPS); 20ms typical (Appliances)
400 x 320 x 184 mm
46 kg
58 kg
0-90%RH (Non-condensing)
22
APSWX3K24VMPPT
3kVA/3kW
24V DC
≥80%
23V DC
18-25V DC
22V DC
21V DC
0-50ºC
-15ºC - 60ºC
PD2
≤2000 m
55 kg
67 kg